SELPHY CP730/CP720 Printer User Guide Macintosh

Getting Ready Printing AppendicesOverview

Troubleshooting Tasks and Index

NextBack

Return to Cover Page

Use the following procedures to charge the battery.

1 Attach the battery to the printer.

2 Connect the power cord to the compact power adapter

and plug it in a power outlet. Connect the compact

power adapter connector to the printer.

While the battery is charging, the power button will light orange

and go out when the battery is charged. The battery will cease

charging if you turn on the printer during the process. When you

turn the printer off again, it will resume charging.

3 After the battery is charged, detach the connector of the

compact power adapter from the printer.

The battery is now ready to power the printer.

The printer will automatically turn off when powered by the battery if the

printer is not used for five minutes or more.

The printer power button will begin to blink orange when the battery

charge is low. In addition, a message may appear on a connected

camera’s LCD monitor or the printer’s LCD monitor. Recharge the

battery or exchange it for a fully charged one.

Charging the Battery

To a power outlet

Remaining Battery Charge