Operating instructions

21
Accessories
Fixation
Use the M8 stainless steel insert thread at the bottom of the flash to fix the SEAFLASH
150digital on the flash arm. The M8 ball adapter is the best way to connect it to our
reliable flash arm system (optional). Clean the thread regularly and grease slightly.
Mounting
Using the flash arm T-base you fix the system to your housing. Tighten this part ca-
refully with the fixation screw at the housing T-pieces. The best and quickest system
to mount your arm is with released joints. Afterwards adjust the flash system to your
working position and fix it you like by tightening the fixation levers.
Feature
If your fixation levers stop at a particular position, you easily can adjust them by
pulling out changing the position and pushing back.