Operating instructions

16
For security reasons, to call attention your flash is equipped with a true S.O.S. function.
With the power switch (1) in the SOS position a true S.O.S. light signal is generated.
This feature can also be used to test the flash.
ATTENTION!
Use the S.O.S. signal only when really needed and never use it to discharge the
battery.
If an error is recognized by the micro processor, a code is shown on the display,
an audible alarm is emitted and all the activities of the flash are stopped. This error
information is used to identify the cause and for security reason.
HI The temperature inside the flash is above 65 °C.
Allow the unit to cool down before switching it on again. If an error state is always
active, the unit will need to be serviced.
ATTENTION!
Never leave the flash unprotected in the sun or a hot place!
S.O.S. Safety Mode
Display Error Codes