S820D Quick Start Guide

54
Printing Maintenance
5. For each message displayed, click OK.
The BJ Status Monitor opens automatically and closes when the printhead
cleaning is done. The POWER lamp on the printer flashes green during the
cleaning process.
6. Print a nozzle check pattern to check the results of the printhead cleaning.
See “Printing a Nozzle Check Pattern” on page 51 for instructions.
7. If there is no change after cleaning, check the amount of ink remaining. If an
ink tank is empty, replace it. See “Monitoring Ink Levels” on page 47 for
instructions on how to check ink tank levels.
To clean the Printhead in Mac OS:
1.
Make sure the printer is on.
2. In a software application, click File, then Page Setup.
3. Click Utilities. The Canon S820D Printer Utility dialog box will display.
4. Select Cleaning from the drop-down list.
The cleaning options will display.
5. Click the Cleaning icon.
6. Read the message, then click OK.
7. Print a nozzle check pattern to check the
results of the printhead cleaning. See
“Printing a Nozzle Check Pattern” on
page 51 for instructions.
S820D QSG.book Page 54 Tuesday, October 23, 2001 12:34 PM