S820D Quick Start Guide

Basic Printing
9
4. Slide the paper guide right to the edge of the sheet.
To load Glossy Photo Paper:
1.
Set the paper thickness lever to the left, towards the paper mark.
2. Slide the paper guide completely to the left.
3. With the glossy side facing up, align a sheet of Glossy Photo Paper with the
right side of the sheet feeder, then insert the sheet into the printer until it stops.
4. Slide the paper guide right to the edge of the sheet.
To load Photo Paper Pro (4" x 6") or Glossy Photo Cards:
1.
Set the paper thickness lever to the left,
towards the paper mark.
2. Slide the paper guide completely to
the left.
3. With the glossy side up, place the
sheet of media on top of the Loading Support Sheet provided with the pack of
Glossy Photo Cards or Photo Paper Pro and align both sheets.
• You can load only one sheet of High Gloss Photo Film in the
sheet feeder at a time.
• Load the sheet of High Gloss Photo Film with the cut corner in
the upper right corner to ensure that the correct print side is
facing up.
You can load only one sheet of Glossy Photo Paper in the sheet
feeder at a time.
• You can load up to 20 sheets of Photo Paper Pro 4" x 6" or
Glossy Photo Card at a time with the loading support sheet.
• Make sure that the loading support sheet is pointing down
in the direction of the arrow.
• To avoid jamming, never load Glossy Photo Card or Photo
Paper Pro 4" x 6" that is curled or bent, and make sure that
the edges of the card and the loading support sheet are
aligned before setting them in the printer.
S820D QSG.book Page 9 Tuesday, October 23, 2001 12:34 PM