S820D Quick Start Guide

8
Basic Printing
To load plain or High Resolution Paper:
1.
Set the paper thickness lever to the left, towards the
paper mark.
2. Slide the paper guide completely to the left.
3. Fan the edges of the sheets to remove static cling.
Tap the edges of the stack against a flat surface so
the stack is aligned.
4. With the whiter side facing up, align the stack with
the right side of the sheet feeder.
5. Slide the paper guide right to the edge of the sheet.
To load Photo Paper Pro:
1. Set the paper thickness lever to the left, towards the paper mark.
2. Slide the paper guide completely to the left.
3. With the glossy side facing up, align a sheet of Photo Paper Pro with the right
side of the sheet feeder, then insert the sheet into the printer until it stops.
4. Slide the paper guide right to the edge of the sheet.
To load High Gloss Photo Film:
1.
Set the paper thickness lever to the left, towards the paper mark.
2. Slide the paper guide completely to the left.
3. With the print side facing up, align a sheet of High Gloss Photo Film with the
right side of the sheet feeder and insert the sheet into the printer until it stops.
You can load up to 100 sheets of plain
(17 lb.) paper or 80 sheets of High
Resolution Paper in the sheet feeder at
one time. When you use High Resolution
Paper, do not touch the whiter print side.
Load only one sheet of Photo Paper Pro in the sheet feeder at
a time.
Paper thickness lever
S820D QSG.book Page 8 Tuesday, October 23, 2001 12:34 PM