Projector User Manual

User Command Specifications
9．Details of command RANGE IMAGE
1
RANGE IMAGE
RANGE IMAGE
RANGE□IMAGE
r:IMAGE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE IMAGE
< r:IMAGE=I, STANDARD, PRESENTATION, CINEMA, SRGB
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Command
s
supported
SX60 X600SX50 SX6
○○
Control Setting Reference
For all other responses, refer to "Error List."
Image mode setting option reques
t
ID
Mode
○○○ –
○○
Commands
Function
Format
Example
Description
Response
This inquires about the parameter options which enable the image mode to be set.
01.00** 01.01** 01.01** 01.01**
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The image mode settings can be selected by the IMAGE command.
Model Power
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○ – ○○ ×
SX6
○○○ ×○○○○○○○
X600
SX60
PAGE 138