Command List
WUX450 / WX520 / WUX400ST / WX450ST User Commands
- 41 -
LAMPCOUNTER
Lamp counter reference
Format
Setting Command -
Response -
Reference Command GET=LAMPCOUNTER
Response g:LAMPCOUNTER="<Lamp ON time:Character string>
Note: See "Error list" for any response other than the above.
< Lamp ON time:Character string >
Lamp counter ON time:H
"[G_______]" 0~539
"[GG______]" 540~1079
"[GGG_____]" 1080~1619
"[GGGG____]" 1620~2159
"[GGGGG___]" 2160~2699
"[GGGGGY__]" 2700~2849
"[GGGGGYY_]" 2850~2999
"[GGGGGYYR]" 3000~
Environment
Power mode restriction
Input
LAN RS-232C
SL0 SL1 SL3 ON ST ON D-RGB A-RGB COMP HDMI LAN USB None
No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
LMPWRN
Lamp replacement warning
Format
Setting Command LMPWRN=<Lamp warning parameter: ID>
Response i:OK
Reference Command GET=LMPWRN
Response g:LMPWRN=<Lamp warning parameter: ID>
Note: See "Error list" for any response other than the above.
< Lamp warning parameter: ID >
Parameter Meaning
OFF Turned off
ON Turned on
Environment
Power mode restriction
Input
LAN RS-232C
SL0 SL1 SL3 ON ST ON D-RGB A-RGB COMP HDMI LAN USB None
No No No Yes No Yes Yes Yes Yes Yes Yes Yes Yes