Command List

WUX450 / WX520 / WUX400ST / WX450ST User Commands
- 20 -
AMBADJ
Ambient light adjustment / OFF
Format
Setting Command AMBADJ=<Ambient light correction adjustment parameter:ID>
Response i:OK
Reference Command GET=AMBADJ
Response g:AMBADJ=<Ambient light correction adjustment parameter:ID>
Note: See "Error list" for any response other than the above.
< Ambient light correction adjustment parameter:ID >
Parameter Meaning
OFF Turned off
ON Adjusted
Environment
Power mode restriction
Input
LAN RS-232C
SL0 SL1 SL3 ON ST ON D-RGB A-RGB COMP HDMI LAN USB None
No No No Yes No Yes Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) "Ambient light level" and "Ambient light type" settings take effect on the displayed image
when "Ambient light correction" is activated.
To adjust the "Ambient light level" or "Ambient light type", use "AMB_LEVEL" or
"AMB_TYPE" command, respectively.
(2) This sets the currently selected input signal and image mode.
AMBLEVEL
Ambient light level settings
Format
Setting Command AMBLEVEL=<Ambient light level settings parameter:ID>
Response i:OK
Reference Command GET=AMBLEVEL
Response g:AMBLEVEL=<Ambient light level settings parameter:ID>
Note: See "Error list" for any response other than the above.
< Ambient light level settings parameter:ID >
Parameter Meaning
OFF Weak
ON Strong
Environment
Power mode restriction
Input
LAN RS-232C
SL0 SL1 SL3 ON ST ON D-RGB A-RGB COMP HDMI LAN USB None
No No No Yes No Yes Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) This sets the currently selected input signal and image mode.