MULTIMEDIA PROJECTOR WUX500, WUX450ST User's Manual

109
Menu Description
Advanced Guide Menu Description
Air filter counter
This resets the counter which reminds you of the time for cleaning and replacing the air filter.
Firmware
Update the projector firmware as follows. Download firmware updates from the Canon
website and store them at the root directory on a USB flash drive.
Check the version indicated before updating the firmware.
Factory defaults
You can reset the menu item settings and restore the system settings to the factory defaults.
Option Function
OK Settings are reset to default.
Cancel Settings are not reset to default.
For details on replacing or cleaning the filter, see P166 - P169.
• Firmware versions shown here are for illustration only and differ from actual
versions.
• In some cases, it may not be possible to download updates. For details, contact the
Canon Customer Support Center.
Firmware updating takes a few minutes. During the update, the LED indicator will flash
in red. Do not turn off the projector while the LED is flashing. After the update, the
projector will automatically turn itself off and enter standby mode.
Main factory defaults
Input settings
Submenu Default Value
Aspect Auto
PC-free multi projection
Mode setting Off
Layout pattern setting
Total number 2
Layout pattern 1x2
Slideshow interval --:--
Animation effect Off
Submenu Default Value
Split screen Off
Input level Auto
Color space Auto
Over scan Off
Progressive Film/auto
Slideshow interval --:--
Animation effect Off