REALiS_Commands
User Command Specifications
9.Details of command GET
1
GET SHARP
GET SHARP
GET□SHAR
P
?△ SHARP
g
;SHARP=<Sharpness settin
g
: Number
>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-2 The sharpness can be set by the SHARP command.
> GET SHARP or ? SHARP
< g:SHARP=3
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Setting Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Example
Number
Mode Control
X700
SX60
○○ ×
×
SX7
○○○○○○○○
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.01** 01.01** 01.01** 01.01**
SX50 SX7
Commands
Function
Format
Description
Response
This inquires about the current sharpness value setting.
Commands
supported
Sharpness value setting inquir
y
○○○ ––○○
SX60 X700
PAGE 86