REALiS_Commands

User Command Specifications
9．Details of command GET
1 GET BLANK
GET BLANK
For all other res
p
onses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the ZCONTDRV command and FCONTDRV command. ）
(2)
The BLANK setting can be controlled using the
BLANK command.
>
GET BLANK or ? BLANK
<
g:BLANK=ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
−−−
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
su
pp
orted
ON BLANK underway
OFF BLANK release underway
Example
ＩＤ
BLANK status Status
Setting
ControlMode
BLANK status inquiry
Reference
−−− -
GET□BLANK
０１．００** ０１．０１** ０１．０１** ０１．０１**
?△BLANK
This command is used to inquire about the current BLANK status.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
g:BLANK=<BLANK status：ＩＤ>
Commands
Function
Format
Description
Response
SX60 X700SX50
×
○○○
SX7
Model Power supply
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
−−− - −−−
SX7
○○○ ×○○○○○
SX60
X700
○○
PAGE 75