REALiS_Commands

User Command Specifications 9. Details of command RANGE
1 RANGE DPON
RANGE DPON
RANGE□DPON
r:DPON=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other responses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the ZCONTDRV command and FCONTDRV command. ）
(2)
Direct power-on can be set using the DPON command.
> RANGE DPON
< r:DPON=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
ーーー
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Mode
ＩＤ
Description
Response
This command is used to inquire about the parameter options which enable direct power-on to be set.
Commands
Function
Format
Direct power-on setting inquiry
Reference
SX50 SX7 SX60 X700
SettingControl
０１．００** ０１．０１** ０１．０１** ０１．０１**
×○○○
Model Power supply
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
ーーーーーー - - ーーー
SX7
○○○○○○○○○○×
SX60
This inquiry can be made when the projector is in both the remote mode and power-on status at the
same time.
Commands
supported
Example
X700
PAGE 171