REALiS_Commands

User Command Specifications 9. Details of command RANGE
1
RANGE VKS/HKS
RANGE VKS/HKS
Vertical keystone setting range inquiry Horizontal keystone setting range inquiry
RANGE□
V
KS RANGE□HKS
r:VKS=N, <Minimum setting value>, <Maximum setting value
>
r:HKS=N, <Minimum setting value>, <Maximum setting value
>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE HKS
< r:HKS=N, -30, 30
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* If the necessary signals are not input, 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
X700
SX60
○○○ ×○○○○
SX7
○○○
–×○ ×○○○ –
SX50
○○○
S-Video D-Video
SCART None
Mode
Remote Local
Remarks
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video
○○○○
01.00** 01.01** 01.01** 01.01**
Control
SX50 SX7 SX60 X700
Setting
The vertical and horizontal keystone settings can be selected by the VKS and HKS commands,
respectively.
Response
Vertical/horizontal keystone setting range request
These inquire about the ranges within which the vertical and horizontal keystone can be set.
Number
Mode
Commands
supported
Reference
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Commands
Function
Format
Example
Description
PAGE 156