REALiS_Commands

User Command Specifications 9. Details of command RANGE
1
RANGE SHARP
RANGE SHARP
RANGE□SHAR
P
r:SHARP=N, <Minimum setting value>, <Maximum setting value>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE SHARP
< r:SHARP=N, -4, 4
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X700
○
This inquires about the range within which the sharpness can be set.
01.01**
Remarks
Video S-Video D-Video SCART
○○ – ○○ –
○
Number
Mode
Commands
Function
Format
Control
Setting Reference
Sharpness setting range reques
t
Example
Description
Response
01.01**
SX50 SX7
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The sharpness can be set by the SHARP command.
LocalD-RGB A-RGB1 A-RGB2 Comp None
Model Power
Input
×
SX50
○○○
Mode
Remote
SX7
○○○ ×○○○○○○○
SX60
X700
Commands
supported
○○○
01.00** 01.01**
SX60
PAGE 141