REALiS_Commands

User Command Specifications 9. Details of command RANGE
1 RANGE BLANK
RANGE BLANK
RANGE□BLANK
r:BLANK=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other responses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the ZCONTDRV command and FCONTDRV command. ）
(2)
The BLANK can be controlled using the BLANK command.
> RANGE BLANK
< r:BLANK=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
−−−
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
ＩＤ
Remarks
None
X700
SX60
○○○×○○○○
SX7
○○○
- −−−
SX50
−−−
D-RGB A-RGB1 A-RGB2 Comp
Model Power supply
Input Mode
Remote LocalVideo S-Video D-Video SCART
×○○○
０１．００** ０１．０１** ０１．０１** ０１．０１**
Commands
Function
Format
Example
Description
Response
X700
This command is used to inquire about the parameter options which enable BLANK to be set.
Setting
ControlMode
BLANK setting option request
Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at the
same time.
Commands
supported
−−− -
SX50 SX7 SX60
PAGE 129