REALiS_SX7_Mark_II_Commands

Projector User Commands
- 123 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
GET CONT
Contrast value setting inquiry
Format
GET□CONT
?△CONT
Response
g:CONT=<Contrast value:Number>
For details on other responses, refer to the "Error List".
Description
This command is used to inquire about the current contrast value setting.
(1) For models other than SX7 Mark II: Inquiry can be made when the projector is in both the remote mode
and power-on status at the same time.
For SX7 Mark II: Inquiry can be made whenever the projector is in the power-on status.
(2) A “busy” response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
(3) The contrast can be set by the CONT command.
Example
> GET CONT or ? CONT
< g:CONT=3
* Commands are indicated by ">", and responses are indicated by "<".
Commands supported
This defines the environments that support the command (power supply state, input signal state).
SX50
01.00**
SX6
01.01**
SX60
01.01**
X600
01.01**
SX7
01.01**
X700
01.01**
SX7 Mark II
01.02**
O O O O O O O
Environment
This defines the environments that support the command (power supply state, input signal state).
Power Input Mode
Model
OFF ON PM
D-RGB A-RGB1 A-RGB2 COMP Video S-Video D-Video SCART None Remote Local
Remarks
SX50 x O x O O O O O O - - O O x
SX6, SX60,
X600
xO x O OO O OOOOO O x
SX7, X700 x O x O O O O OOOOO O x
SX7 Mark II
xO x O OO O OOOOO O O
* If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
* When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Reference