User`s manual

2.3.5 Pano360/PC connection
Lastly plug the micro USB connector on the side of the device (Fig 1-E/Fig. 10) and the other end of
the cable to your computer. All the connections for Pano360 are done. The device is ready for
configuration and a test run.
Fig. 10 Micro USB connector – Pano360/PC communication
3. Pano360 GUI
Pano360 GUI (Graphic User Interface) is a window application that lets you enter different
parameters of the device. Below is a quick overview of the program.
Fig. 11 Pano360 GUI overview.
Micro USB connector
A
Parameters which are used to
protect the motor and controller
from damage.
B
Parameters which are used to
determine when the motor has
came to a stop.
C
These parameters determine the
rotation angle and the shaft position.
D
Preset list,preset order setting
E
Parameters that tell how
many photos should be taken
during the entire rotation
F
Kinematics determine the speed,
acceleration and deceleration of
the rotation
G
These parameters define how and
when the camera is triggered