Technical information

hp psc 1300 series

chapter 4

adjust copy speed or quality

The HP PSC automatically copies in Best mode. This produces the highest quality

copies for all paper. However, you can manually override this setting to copy

in Fast mode. This produces copies more quickly and saves ink. The text is of

comparable quality to copies produced using Best mode, but the graphics might

be of lower quality.

to make a copy from the front panel using the fast setting

1 Load your original face down on the left front corner of the glass.

2 Press the Paper Type button to select Plain.

Note: In order to make a copy using Fast mode, you must select Plain as

the Paper Type. If the Paper Type is set to Photo, the HP PSC will always

copy in Best mode.

3 Press and hold down the Scan button, and then press Start Copy, Black or

Start Copy, Color.

set the number of copies

1 Load your original face down on the left front corner of the glass.

2 Press Copies to increase the number of copies, up to a maximum of 9, and

then press Start Copy, Black or Start Copy, Color.

perform special copy jobs

In addition to standard copying, your HP PSC can copy photos and

automatically enlarge or reduce your original to fit a specific paper size.

This section contains the following topics:

• make a 4 by 6 inch (10 by 15 cm) borderless copy of a photo on page 26

• reduce or enlarge an original to fit the paper loaded on page 27

For information on copy options that are available in the HP Director, see the

onscreen hp photo & imaging help that came with your software.

make a 4 by 6 inch (10 by 15 cm) borderless copy of a photo

For the best quality when copying a photo, load photo paper in the paper tray,

and then use the Paper Type button to select Photo. You might also want to use

the photo print cartridge for superior print quality. With the tri-color and photo

print cartridges installed, you have a six-ink system. See use a photo print

cartridge on page 36 for more information.

1 Load your original photo face down on the left front corner of the glass.

Position the photo on the glass so the long edge of the photo is along the

front edge of the glass.