Service manual

3-39
CHAPTER 3. REPAIR INSTRUCTION
3.5.7 Chinese Characters
Note: This adjustment is only for the “OTH” Model.
■ Tools Used
• Personal Computer • Compact Power Adapter CA-PS500
• INTERFACE CABLE IFC-300PCU • Adjustment Software
1 Click the “Chinese Characters” button.
2 1. When the message on the right appears, check
if the third place of serial number on the
camera is “4”.
2. Click the “ADJUST” button.
3 When the message on the right appears, click the
“FINISH” button.
(This ends the “Chinese Character” Setup.)