Service manual

How to print out the Auto Focus Chart
The large materials such as “Auto Focus Chart” that occupies a page of large size, can be divided into
several smaller pages using “Graphic Select Tool” for printing the entire page.
< Procedures >
1. Select “ Text Select Tool” from the Command Bar and keep pressing it.
Then, select the “ Graphic Select Tool”.
2. Select the desired portion to print. (Drag the cursor on desired area.)
3. Click “Print” of the Menu Bar. Check “Selected Thumbnails/Graphic”, then start printing.
When you check “Fit of Page”, the data can be reduced or enlarged of its printing size so that the
printing size fits the size of paper.*
4. To cancel the printing area, click an arbitrary position on the display.
* Remarks
The “Auto Focus Chart” of the Service Manual that is saved in this CD-ROM, has the colored mark-
ings in colors so that the entire page can be divided into print papers (legal-size x 4 pages, A3 size x 3
pages). Operate as follows.
Select “Graphic Select Tool”. Select the 2 markings having the same color to select the first printing
area. Press "Print" to print the first printing area. Perform the above steps 2 and 3. Select another 2
markings having the second color to select the second printing area. Press “Print” to print the second
printing area. Repeat this procedure until the all pages are printed.
< Legal-size > < A3 size >
: Markings