User Manual

[Clone printers]

Introduction

You have several Operator Consoles installed. The printer drivers are installed and configured on

one of the Operator Consoles. You can clone the printer drivers. Cloning means that the printer

drivers are automatically installed and configured on another [Operator Console]. The [Clone

printers] procedure consists of the following two steps:

1. Collect the printer data of the printer drivers.

Once the printer data is collected, you can clone the printer driver(s).

2. Clone the printer drivers.

The cloned printer drivers are installed on the selected [Operator Console]. The printer drivers

are configured with the collected printer data.

NOTE

You can use the collected printer data only on similar operating systems.

For example, you have collected the printer data from a Microsoft Windows XP system. You can

only use the collected printer data on another Microsoft Windows XP system.

[Collect printer data]

Introduction

Collect the printer data of the printer drivers that are installed and configured on one of the

Operator Consoles. Once the printer data is collected, you can clone the printer driver(s).

Procedure

Click the [Collect printer data] button.

The [Printer data] dialog opens.

Select the printer driver(s) you want to collect the printer data from. You can select one or more

printer driver(s).

Click the [OK] button.

A message appears when the printer data is collected. The printer data is stored on the [Central

Server].

NOTE

You can use the collected printer data only on similar operating systems. For example, you have

collected the printer data from a Microsoft Windows XP system. You can only use the collected

printer data on another Microsoft Windows XP system.

Close the [Collect printer data] dialog.

[Clone printers]

Chapter 1 - Global settings

PRISMAdirect v1.2