User's Manual

Instruction for Canon Pixma ip4200 CISS
I CISS Components:
1) CISS 1 set 2) air filter 5 pcs 3) support arm 1 set
4) Syringe 5 pcs 5) CD instruction 1 pc
II How to Install:
Step 1:
1.Put the CISS at the right side of 2. Pull out the rubber plug from 3. Insert the Air Filter.
the printer the Air Hole.
Step 2: Install Chips
1.Take out the original cartridge, 2.Use knife to cut the 2 points 3. Then the chip is removed.
and find the chip. that fix the chip. And then
remove the chip. Pls be careful
when doing this.

Summary of content (4 pages)