Operation Manual
26
BeforeUse
BasicGuide
AdvancedGuide
CameraBasics
AutoMode/Hybrid
AutoMode
OtherShooting
Modes
PMode
PlaybackMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
If [Raise the ash] appears on the screen,
move the <h> switch to raise the ash.
It will re when shooting. If you prefer not
to use the ash, push it down with your
nger, into the camera.
Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the ash, it res
automatically.
Keep the camera still until the shutter
sound ends.
After displaying your shot, the camera will
revert to the shooting screen.
ShootingMovies
Startshooting.
Press the movie button. The camera
beeps once as recording begins, and
[
Rec] is displayed with the elapsed time.
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
off the movie button.
Elapsed Time
Resizethesubjectand
recomposetheshotasneeded.
To resize the subject, repeat the
operations in step 3 (=
25).
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finishshooting.
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Recording will stop automatically when
the memory card becomes full.