Operation Manual

104
1
2
3
4
5
6
7
8
9
10
Cover
BeforeUse
CommonCamera
Operations
AdvancedGuide
CameraBasics
AutoMode
OtherShooting
Modes
PMode
PlaybackMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
Tv,Av,andM
Mode
4 Choose[AddaDevice].
 Press the <o><p> buttons or turn the
<5> dial to choose [Add a Device], and
then press the <m> button.
5 Toconnecttoasmartphoneor
printer:
Choose[SwitchNetwork].
 When the [Waiting to connect] screen
is displayed (=
106), choose [Switch
Network] (either press the <q><r>
buttons or turn the <5> dial), and then
press the <m> button.
6 Choose[WPSConnection].
 Press the <o><p> buttons or turn the
<5> dial to choose [WPS Connection],
and then press the <m> button.
7 Choose[PBCMethod].
 Press the <o><p> buttons or turn the
<5> dial to choose [PBC Method], and
then press the <m> button.
8 Establishtheconnection.
 On the access point, hold down the WPS
connection button for a few seconds.
 On the camera, press the <m> button.
 The camera will connect to the access
point.
 If you have selected [ ], [2], or [ ] in
step 3, devices connected to the access
point are listed on the [Select a Device]
screen displayed next.
 If you have selected a Web service in
step 3, go to step 11.
9 Toconnecttoasmartphone,
printer,orcomputer:
Choosethetargetdevice.
 Press the <o><p> buttons or turn the
<5> dial to choose the computer name,
and then press the <m> button.
 If you have selected a smartphone,
printer, or Macintosh computer, go to
step 11.
10  Ifyouhaveselectedacomputer
runningWindowsinstep9for
thersttime:
Installadriver.
 When the screen at left is displayed on
the camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].