user manual

99
In D mode, you can choose 3 levels of flash output.
Set the camera to D mode.
Choose the flash output.
● After pressing the m button, press the
op buttons to choose ~.
Make the setting.
● Press the qr buttons or turn the  dial
to choose an option, then press the m
button.
Adjusting the Flash Output
• To set the flash output, choose [Flash Control] (p. 97) from the 4 tab,
then choose [Flash Exp. Comp] and press the qr buttons to choose a
setting (p. 49).
• In M and B modes, you can set the flash output if you choose the 4
tab, then [Flash Control] and set the [Flash Mode] option to [Manual].