user manual

Shooting with Slow Synchro
92
Set the exposure compensation
amount.
● Press the l button.
● Press the qr buttons or turn the  dial
to adjust the setting.
● From the exposure set by the camera, you
can adjust the amount of compensation
±2 stops in 1/3-stop increments. If
exposure compensation (p. 69) is already
being used, settings are made with the
compensated value as the base.
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Raise the flash (p. 69).
Choose ….
● After pressing the h button, press the qr
buttons or turn the  dial to choose …,
then press the m button again.
X Once set, … will appear on the screen.
Shoot.
● Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
• If the flash fires, a single, normal image will be shot.
• Continuous shooting (p. 75) cannot be used in this mode.
Shooting with Slow Synchro
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. It is recommended to set the [IS Mode] to [Off] when
shooting with a tripod (p. 149).