Digital Camera User Manual

You can change the look of an image when shooting. However, depending

on the scene, the image may become rough, or the colors may not come out

as expected. We recommend saving the original image as well as the new

one (p. 89).

T Color Accent

You can take shots where only a single chosen color from within the screen

remains, and the rest of the shot changes to black and white.

Select T.

● Set the mode switch to K, turn the Â

dial and select T.

Press the l button.

● The unchanged image, and the Color

Accent image will both display.

● The color for default settings is green.

Indicate the color.

●

Position the center frame so it is filled with the

the color you want, and press the

button.

X The color indicated will be recorded.

Indicated the area to be colored.

●

Press the

buttons or turn the

dial,

and change the area you want to color.

● When you want only the color that you

have chosen to remain, increase the value

of -. When you want to colors to remain

that are close to the color you have

chosen, increase the value of +.

●

Pressing the

button will make the

setting, and will return to the shooting screen.

Changing the Color and Shooting

Recorded color

• Using the flash may cause the image to come out different than

expected.

• Even if you turn off the power, the recorded color will be saved.

COPY