ZoomBrowser EX 5.0 Software User Guide

37 ZoomBrowser EX Software User Guide
Chapter 3
What You Can Do
with a Camera Connected
3.
Select the settings file you would like to replace in the
Camera list and click [Save to Camera].
Click [OK] if a confirmation dialog appears. The settings file in
the camera will now be replaced with the one you specified
from the computer.
REFERENCE
• Please note that the original settings file in the camera is
overwritten and permanently erased. To restore the original
settings file, you must add it once more to the camera. Before
you overwrite a settings file in the camera, confirm that it
appears in the My Computer list.
Setting the My Camera Settings (4/7)
Repeat Steps 1-3 to replace all the settings files with those you
wish to save to the camera.
A Select the setting you want to replace.
B Click this.
4.
Click the [Close] button to close the dialog.
This concludes the procedure for adding settings to the camera.
See your Camera User Guide for instructions on changing the
start-up image, start-up sound and other settings.
IMPORTANT
• Never detach the interface cable, turn off the camera power or
do anything to stop communication between the camera and
computer while the My Camera Settings are being saved to the
camera.
REFERENCE
• To delete settings files in the Camera list, select the file and click
the [Delete] button.
• You can check a sound file in the camera by clicking [Play].
Click here to delete a file from the list.
Click here to check a sound file in the
camera.
Displays the camera settings when
an image file is selected.