Professional Products 2010 Brochure

ManualsBrandsCanon ManualsDigital CameraPowerShot S90

EOS-1D Mark IV Custom Function Chart

161

Exposure level

increments

1/3-stop set 1/3-stop compensation

1-stop set 1/3-stop compensation

ISO speed setting

increments

Viewfinder info.

during exp.

ISO set in 1/3-stop increments

Disable

ISO set in 1-stop increments

Enable (viewfinder info visible during bursts)

Off

On during Bulb

1/2-stop set 1/2-stop compensation

Set ISO speed range

LCD panel illumination during

Bulb

Disable (camera ISO range 100~3200)

Enable (apply user-registered available ISO range)

Highest ISO Speed

Lowest ISO Speed

Apply

100 - 12800, H1,H2,H3 [TD] (1-stop increments)

L, 100 - 12800

–

Bracketing Auto Cancel

INFO button when

shooting

On (AEB cancels if camera turned off, etc.)

Displays shooting function

Off (AEB remains in effect unless flash turned on)

Displays camera settings

4 Al Servo AF tracking method

Main focus point priority

Continuous AF track priority (ignores closer objects)

Lens drive when

AF impossible

9 Multi-controller while meter

10 Selectable AF point

Lens AF stop button function

(select Canon Super-telephoto

IS lenses only

)

Focus search on

Focus search off

AF stop

AF start

AE lock

6 Number of bracketing shots

–

3 shots

Slow: -2, -1, 0, +1, +2: Fast

MF possible after One-shot AF completed

Disable after One-shot AF

Disable completely in AF mode

1 2 shots

2 5 shots

0 Disable (spot metering always at center)

8 Safety Shift

1 Enable (Tv/Av modes)

Disable

2 Enable (ISO speed shifts, in P, Tv, Av modes)

Enable (spot metering at manually selected AF pt.)

Select usable

shooting modes

–

Disable (all exposure modes available)

Enable (only modes registered are selectable)

BULB

Apply

Select usable

metering modes

–

Disable (all metering patterns available)

Enable (only metering modes registered are selectable)

Exposure mode in

manual expo.

0 Specified metering mode on camera’s LCD panel

1 Evaluative metering only in M mode

2 Partial metering only in M mode

3 Spot metering only in M mode

4 Center-weighted average only in M mode

Set shutter speed range

–

Disable

Off

Enable (apply user-registered range)

AF point selection

Highest speed: 8000–15" (1-stop increments)

Lowest speed: 30"–4000 (1-stop increments)

Apply

45 points

Disable (use lens’s full aperture range)

Enable (apply user-registered aperture range)

Min. aperture (Max. f/): 1.4–91

Disable

Max. aperture ((Min. f/): 1.0–64

Switch with < >

With AE lock button (AF on)

With AE lock button (AF off)

Apply

Only while < > is pressed

Set aperture value range

Switch to registered AF point

–

Apply shooting/

Metering mode

–

Disable (no switching to registered settings)

Enable (Press “ * ” button to switch settings)

Flash sync. speed in

Av mode

Auto (shutter speed set based on ambient light)

1/300 sec - 1/60 sec. auto

2 1/300 sec. (fixed)

Long exp. noise

reduction

0 Off

Auto (camera decides whether to apply reduction)

On (noise reduction applied; 1 sec. and longer only)

High ISO speed

noise reduction

0 Standard

1 Low

2 Strong

3 Disable

3 Highlight tone priority

0 Disable

1 Enable

4 Auto Lighting Optimizer

0 Standard

Low

Strong

Microadjustment

–

Disable

Enable (±1 stops in 1/8-stop increments)

Microadjustment

Disable

Enable (±1 stops in 1/8-stop increments)

Bracketing sequence

USM lens electronic MF

AI Servo tracking sensitivity

– +

–

0 +

+ 0 –

Spot metering link

to AF point

Setting

Custom

Function

Custom

Function

Function Description

3 7 shots

–

No.

C.Fn I: Exposure

C.Fn II: Image/Flash exp/Display

E-TTL II flash metering

Limit continuous shot count

–

Evaluative flash metering

Disable

Enable

Average flash metering over all 63 metering zones

Flash firing

Enable

Disable – AF assist beam continues to operate

C.Fn III: Autofocus/Drive

AI Servo 1st/2nd image

priority

AF priority/2nd shot onward – Tracking priority

AF priority/2nd shot onward – Drive speed priority

Release/2nd shot onward – Drive speed priority

Shutter curtain sync.

0 1st-curtain synchronization

(Cont.)

Disable

2nd-curtain synchronization (EOS Speedlites only)

Release/2nd shot onward – Tracking priority

ONE SHOT AI Servo

IS start

Switch to registered AF point

Spot AF

AF Microadjustment

Disable (no adjustment for front or back-focus)

1 Adjust all by same amount

Adjust by lens

Forward: -20 ……. 0 …… +20 Backward

AF expansion with

selected pt

Disable (one AF point only when manually selected)

Left/right AF point

Surrounding AF points

19 points

11 points

Inner 9 points

Outer 9 points

All 45 points area

AF point auto selection

direct: disable / : enable

direct: disable / :disable (auto AF select mode impossible to access)

direct: enable / : enable

AF point display

during focus

On (red illumination on)

1 Off

2 On (lights momentarily when focus achieved)

AF point brightness

Normal

Brighter

Orientation linked AF point

Same for both vertic./horiz.

Select different AF points

AF-assist beam firing

Enable (Speedlite’s AF assist beam fires normally)

Disable

2 IR AF assist beam only

Mirror lockup

0 Disable

Enable (mirror lowers after each shot)

2 Enable: Down with SET

(mirror remains up until SET pressed)

Continuous shooting

speed

–

Disable (shoots at default fps rates)

Enable (applies user-registered fps rates)

High speed: 10 - 2 fps (per shot)

Low speed: 1 - 9 fps (per shot)

Apply

AF point:M Auto/Auto ctr

Setting

162

Custom

Function

Function Description Setting

No.

EOS 5D Mark II Custom Function Chart

Function Description SettingNo.

Exposure level increments

ISO speed setting increments

ISO expansion

Bracketing auto cancel

Bracketing sequence

Safety shift

Flash sync. speed in Av mode

Long exposure noise reduction

High ISO speed noise reduction

Highlight Tone Priority

Auto Lighting Optimizer

Lens drive when AF impossible

Lens AF stop button function

AF point selection method

Superimposed display

AF-assist beam firing

Mirror lockup

AF point area expansion

AF Microadjustment

Shutter button/AF-ON button

AF-ON/AE lock button switch

Assign SET button

Dial direction during Tv/Av

Focusing screen

Add original decision data

0 1/3-stop

1 1/2-stop

0 1/3-stop

1 1-stop

0 Off

1 On

0 On

1 Off

0 0, –, +

1 –, 0, +

0 Disable

1 Enable (Tv/Av)

0 Auto

1 1/200–1/60 sec. (auto)

2 1/200 sec. (fixed)

0 Off

1 Auto

2 On

0 Standard

1 Weak

2 Strong

3 Disable

0 Disable

1 Enable

0 Standard

1 Weak

2 Strong

3 Disable

0 Focus search on

1 Focus search off

0 AF stop

1 AF start

2 AE lock

3 AF point: M Auto/Auto ctr

4 ONE SHOT AI SERVO

5 IS start

0 Normal

1 Multi-controller direct

2 Quick Control Dial direct

0 On

1 Off

0 Enable

1 Disable

0 Disable

1 Enable

0 Disable

1 Enable

0 Disable

1 Adjust all by same amount

2 Adjust by lens

0 Metering + AF start

1 Metering + AF start/AF stop

2 Metering start/Meter + AF start

3 AE lock/Metering + AF start

4 Metering + AF start/disable

0 Disable

1 Enable

0 Normal (disabled)

1 Change quality

2 Change Picture Style

3 Menu display

4 Image replay

5 Quick control screen

6 Record movie (Live View)

0 Normal

1 Reverse direction

0 Eg-A

1 Eg-D

2 Eg-S

0 Off

1 On

C.Fn IV: Operation/Others

C.Fn II: Image

C.Fn III: Autofocus/Drive

C.Fn I: Exposure

AF-ON/AE lock

button switch

Metering + AF start/disable (AF-on button)

Disable

Enable (reverse role of AEL and AF-on buttons)

Tv/Av setting for

Manual exp.

13 Timer length for timer

0 Normal

Reverse direction

0 Disable

Enable (possible to set aperture on body w/o lens)

(Cont.)

–

Metering start/Meter + AF start (no AF at shutter button)

AE lock/Metering + AF start

C.Fn IV: Operation/Others√Operation/Others

Shutter curtain sync.

Metering + AF start (at both buttons)

Metering + AF start/AF stop

1 Quick start ( <FEL>button)

Default (from LV)

Add aspect ratio

information

Aspect ratio 5:7

Off

Aspect ratio 6:6

Aspect ratio 3:4

Aspect ratio 4:5

Aspect ratio 6:7

Aspect ratio 10:12

1 On (used by optional Original Data Security Kit)

Off

Add original verification

data

Quick Control Dial

in meter

Exposure comp/Aperture

AF point selection (instant AF point access with rear dial)

2 ISO speed (instant ISO access with rear dial)

3 AF point selection + < >

Assign SET button

Normal (disabled)

White balance

Image size

3 ISO Speed

Picture Style

Record func. + media/folder

Menu display

Image playback

Tv= / Av=

(reverse functions in M mode for top/rear dials)

Dial direction during

Tv/Av

Av setting without lens

Rear LCD panel

LCD monitor (displayed when FUNC button pressed)

Protect (hold: Record memo)

Record memo (Protect: Disabled)

Play memo (hold: Record memo)

Normal (enable)

WB + media/image size

setting

Button function

Button function when

<off>

Start movie shooting

1 Enable (as low as 40ms, depending upon lens aperture)

Disable (standard 55ms “time lag”)

Shortened release

time lag

Focusing Screen

Disable , , Multi-controller

Ec-C IV

Ec-A, B, C, C II, C III, D, H, I, L

Ec-S

Ec-N, R

Disable (use camera’s built-in settings)

Enable (apply user-registered changes)

6 sec. timer: 0–6–59 sec., 1–60 min.

16 sec. timer: 0–16–59 sec., 1–60 min.

Time after release: 0–2–59 sec., 1–60 min.

Apply

Limited shots: 99–2

Apply

ISO speed + < >

Custom

Function