User's Manual

112
Viewing Images on a TV Set
You can use a video-compatible television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied AV Cable AVC-DC300.
1 Turn off the camera and the TV.
2 Connect the AV Cable to the
camera's A/V OUT terminal.
Slide the camera's DIGITAL terminal
cover in the direction of the
e to open it,
and plug the AV Cable in all the way.
3 Plug the other ends
of the A/V Cable into
the VIDEO IN and
AUDIO IN jacks on
the TV.
4 Turn on the TV and switch it to Video mode.
5 Power on the camera in Shooting mode or Playback
mode.
z The image will appear on the TV. Shoot or play back images as usual.
z Press the DISP. button when images are not being displayed on the TV
when shooting.
 No image will appear on the LCD monitor when the camera is
connected to a TV monitor.
 If the TV is a stereo model, you can plug the audio plug into either the
left or right Audio In jack. Please refer to the TV's manual for details.
 Refer to (p. 31), for instructions regarding the video output signal.
 A TV set cannot be used in the (Stitch Assist) mode.
To the Video IN Jack
Plug (Yellow)
To the Audio IN Jack
Plug (Black)
Vewing Images on a TV set