Software Starter Guide (For the Canon Digital Camera Solution Disk Ver.26)

Operating the Shutter Remotely

RemoteCapture Task Window

The RemoteCapture Task window has the following features.

• The settings available in the RemoteCapture Task window vary between

camera models.

• RemoteCapture Task locks the exposure and focus settings for the subject

matter in the Viewfinder section. If the lighting or distance to the subject

changes, click to reset these settings.

Size and Resolution Selector

Selects the size and resolution at which images are captured.

You can add

comments to images

by placing a check

mark here and

typing text in the

boxes below.

Viewfinder Display

Click the [Start/Stop

Viewfinder] button

while a connection to

the camera is open to

display the image

appearing in the

camera’s viewfinder.

Slide this to zoom

the camera in or out.

Set the basic camera settings here.

Rotation Settings

Sets the rotation

parameters for

images after they are

captured.

Shows/Hides the

viewfinder or detailed

settings area.

Release Button

Releases the

shutter.

Start/Stop Viewfinder

Button

Starts or stops the

viewfinder display.

Refresh Button

Resets the exposure,

focus and white

balance.

00a Book.book Page 42 Thursday, June 23, 2005 5:43 PM