Digital Camera User Manual

2 Turn the multi control dial to

select a movie mode.

z See Selecting Menus and Settings (Basic

Guide: p. 16).

z You can shoot the image right after

selecting settings by pressing the shutter

button. The menu displays again after the

shot, allowing you to change the settings easily.

z In or mode, you can change the resolution (p. 33) and

frame rate (p. 33).

3 Press the shutter button halfway.

The camera will automatically set the exposure,

focus and white balance.

4 Press the shutter button fully.

z Shooting and sound recording starts

simultaneously.

z During shooting the recording time and the

[z(Rec.)] appear on the LCD monitor.

z When displays, you can use the

digital zoom.

5 Press the shutter fully again to stop

recording.

z The maximum recording time may vary with

the subject and shooting conditions. Just

before the maximum is reached, or just before

the memory card fills to capacity, the counter

at the bottom right of the LCD monitor will display in red and recording

will stop automatically after approximately 10 seconds (excluding

(Compact)).