PowerShot S230, Digital IXUS V3 Camera User Guide

136
Appendices
Subject in recorded
image is too bright
Flash does not fire
Image not showing
on TV monitor
Zoom does not
work
Reading images
from CF card is
slow
Recording images
to CF card takes a
long time
• Change the shooting angle.
• Set the flash to off.
• Set the flash to on.
• Set the video system to the
appropriate setting, NTSC or
PAL, for your TV (p. 124).
• The output will not appear on a
TV in or (Stitch Assist)
mode. Shoot in a different
mode.
• Adjust the zoom before
shooting a movie.
• Use a CF card formatted in your
camera. See Formatting CF
Cards (p. 89).
Problem Cause Solution
Light is shining
directly on the
subject or reflected
off the subject into
the camera
Flash is set to on
Flash is set to off
Incorrect video
system setting
Shooting mode set
to or (Stitch
Assist)
Zoom lever
pressed during
movie recording
CF card was
formatted in
another device