PowerShot S200, Digital IXUS V2 Camera User Guide

Printing

Connecting a Printer

You can make clear prints swiftly and easily when you connect the

camera to a direct print function compatible printer. You can also print

using DPOF print settings.

• You are recommended to use a household power source

rather than the battery pack to power the camera when it

is connected to a printer. If you do use a battery pack,

ensure that it is fully charged and monitor the battery

charge while printing.

• Please see the System Map supplied with your camera for

the list of direct print function compatible printers.

• Please see your printer’s user guide for information about

installing paper and ink cassettes/ tanks.

Connecting to a Direct Print Function Compatible Printer

Your printer should come equipped with two direct interface cables. To

connect to this camera, please use the cable (DIF-200) that has the

symbol on its connector.

• Attach the power cable to the printer

and insert its plug into an electrical

outlet.

• You can also power the printer with a

rechargeable battery if it is so equipped.

Please see your printer’s user guide.

Shut the camera’s

power off (p. 26).

To an Electrical

Outlet

▲