PowerShot S200, Digital IXUS V2 Camera User Guide

113
Shooting / Replaying with a TV
You can use a video-compatible television as a monitor to shoot or
replay images when it is connected to the camera with the supplied AV
Cable AVC-DC200. You must shut the TV and camera power off
before you attach or detach the AV cable.
• After you have attached the AV cable at both ends, turn on the TV
and set its TV/Video switch to Video.
• Set the mode switch to
, or and turn the camera power on.
You can shoot or replay images using the normal procedures.
• If the images are not appearing on the TV when shooting, press the
button.
• A TV cannot be used in or mode.
• No image will appear on the LCD monitor when the
camera is connected to a TV.
• If the TV is a stereo model, you can plug the audio plug
into either the left or right Audio In jack. Please refer to
the TV’s manual for details.
• The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards. The default
setting varies between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If the video system is set incorrectly, the camera output may
not display properly.
Yellow
Black