User's Manual

40
3 Shoot the first frame.
• Press the SET button again if you wish to
change the image arrangement setting.
• The settings for the exposure and white
balance are locked at the values used for
the first image.
4 Shoot the second image so that it
overlaps the first.
• Horizontal
Example
• 2 x 2
Example
• Pressing the
, , or button
returns the display to the previously
captured images so that you can rerecord
an image.
5 Repeat the previous steps to record
additional frames.
• A maximum of 26 images can be recorded
in either the horizontal or vertical direction.
6 Press the SET button after the last image
has been recorded.
• Minor discrepancies in the overlapping
portions can be corrected when the
images are stitched together.
• The zoom, flash on/off, exposure
compensation, white balance and
resolution settings can only be set for
the first image in the series.
• The digital zoom, image quality (gain,
sharpness and contrast) and continuous,
auto flash, red-eye reduction, AE lock,
and exposure metering modes cannot
be adjusted in this mode.
• A TV cannot be used as the viewfinder
in this mode.