User Guide for ImageBrowser version 3.6

5 ImageBrowser Software User Guide
Chapter 1
Try It! ImageBrowser
REFERENCE
•You can also start ImageBrowser automatically without starting
iPhoto or Image Capture when you connect the camera to the
computer. See the Starting ImageBrowser Automatically (Mac
OS X Only) topic in the Appendices for information on this
topic.
Depending on the selections you make during installation, the
Canon ImageBrowser icon may not appear on the desktop. In
this case, start ImageBrowser by double-clicking on the applica-
tion using the following sequence.
Locate and open the [Canon Utilities] folder, then open the
[ImageBrowser] folder and double-click on the [ImageBrowser]
icon.
4.
Click [Canon Camera] in the Explorer View section.
Starting ImageBrowser (2/5)
A dialog similar to the one below will open. (This dialog will
only appear the first time the program is started.)
5.
Confirm that [USB Port] is selected in the [Port] cat-
egory and that your camera model name or [Canon
Camera] is selected in the [Detected Camera] category
and click [Set].
6.
Close iPhoto or Image Capture if either program starts
up.
The Camera Window will open and display the images in the
camera.
Explorer View Section
Your camera model name
or [Canon Camera] and
the USB port number (i.e.
@1) appears here.