PowerShot S110 Camera User Guide

28
Basic Functions
Remaining Image Capacity
(Recordable seconds remaining
for movies)
p. 36
p. 44
p. 45
p. 37
p. 37
p. 39
p. 42
p. 41
p. 35
p. 27
Shooting Mode
Exposure Compensation
White Balance
Compression
Resolution
Flash
Shooting Method
Macro/Infinity
Zoom Setting*
Camera Blur Warning
x2.5/x3.1/x4.0/x5.0
Information Displayed on the LCD Monitor
Shooting Mode
In shooting mode, information about the current settings and
remaining image capacity will display on the LCD monitor for
approximately six seconds when the actions below are taken,
regardless of whether the LCD monitor is set to On or Off.
While this information is displayed, you may set the flash,
continuous mode, self-timer, macro and infinity settings.
• The power is turned on.
• The
, , / , or / button is pressed.
• The camera settings are changed.
• The Rec. menu is closed.
• The shutter button has been pressed and a shot has been taken.
(LCD monitor must be on)
• The LCD monitor will turn on when the
mode switch is set to the position.
• In replay mode, pressing the
button cycles between display modes.
Information Displayed
Replay Mode (Mode switch set to )
Single Image Replay ...........Standard ➞ Detailed ➞ No Display
Index Replay (9 Images) ...................... Standard ➞ No Display
* The displayed zoom setting is the combined
effect of the optical and digital zooms. It
displays when the digital zoom is activated.
The resolution, but not
compression, shows in
movie mode.