ImageBrowser_v1x_guide

36 ImageBrowser Software Guide
Chapter 5
Using the Camera Window
This chapter describes how to use the Camera Window of
ImageBrowser. Let’s begin by looking at the three ways of
opening the Camera Window.
Automatic opening
When you connect the camera through a USB port and make it
ready for communication with your computer, ImageBrowser
starts automatically. Both the Browser and Camera Windows
appear. However, if ImageBrowser is already running when you
do this, only the Camera Window opens automatically.
REFERENCE
The Camera Window does not open automatically if “The
application program below will start.” is not checked in
[Canon USB Camera] on the [Control Panels].
Double-clicking Canon Camera in the Explorer View
Section
In the Explorer View Section, double-click [Canon Camera] to
open the Camera Window.
Opening the Camera Window
Using the Canon Camera button
Click (Canon Camera) to display the Camera Window.
REFERENCE
• If the “No camera detected” message appears, refer to the
Troubleshooting section in the Appendices for information on
how to solve the problem.
• If you want to use a CF card reader or a PC card reader,
see the Using Non-USB Connections section in the
Appendices.
Double-click here.
Click here.