PowerShot N100 Camera User Guide

32
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto /
Dual Capture Mode
 If [Raise the ash] appears on the screen,
move the <h> switch to raise the ash. It
will re when shooting. If you prefer not
to use the ash, push it down with your
nger, into the camera.
Shoot.
 Press the shutter button all the way
down.
 As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the ash, it res
automatically.
 Keep the camera still until the shutter
sound ends.
 After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
 Press the movie button. The camera
beeps once as recording begins, and
[
Rec] is displayed with the elapsed
time.
 Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
 Frames displayed around any detected
faces indicate that they are in focus.
 Once recording begins, take your nger
off the movie button.
Elapsed Time
Resize the subject and
recompose the shot as needed.
 To resize the subject, repeat the
operations in step 3 (=
31). However,
note that the sound of camera operations
will be recorded, and movies shot at
zoom factors shown in blue will look
grainy.
 When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
 Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
 Recording will stop automatically when
the memory card becomes full.
• The ash ring during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background (Multi-
area White Balance).