Camera User Guide G3

143
Printing, Transferring
Setting the Printing Area (Trimming)
You can specify which portion for an image gets printed.
Prior to Trimming
Please set the Print Style (Image Settings, Paper, Borders and Date) first before setting
the trimming settings (p. 141).
1
In replay mode, press the button
and the C or D arrow on the omni
selector to choose [Trimming] and press
the button again.
• The trimming frame will appear at the center of
the image. If a trimming setting has already
been selected for the image, the frame will
appear around the previously selected portion.
Print Area Frame
4
Press the button.
• With borderless or multiple prints, the top,
bottom and sides of the image may be cropped
slightly. If you have not specified a trimming
setting, a frame will appear around the area of
the image that will be printed, allowing you to
check the portion that will be cropped.
• The date settings are overridden by the DPOF settings if you are using them to
print (p. 145).
• When printing multiple prints, the borders and the date cannot be set. (Images are
printed without any date or borders)
• With the [Bordered] option, the border is printed in practically the same space as
the recorded image.