Camera User Guide G3

110
Using the ND Filter
The brightness can be decreased by setting the ND filter on. This allows you to select
a smaller aperture and a slower shutter speed than usual.
1
Press the button to turn on the LCD monitor.
2
Select [ND Filter] in the [ (Rec.)] menu.
See Selecting Menus and Settings (p. 42).
3
Select [On] and press the button.
appears on the Display Panel. also appears on the LCD monitor if it is on.
Always use a tripod to prevent camera shake in this mode.
Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 204).
Standard brightness is decreased to approximately 1/8 when the ND filter is on.
For example, if the appropriate aperture value is 5.6, it becomes 2 when the ND
filter is on.