Operation Manual

94
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
• After you set the shutter speed or aperture value, the exposure level
may change if you adjust the zoom or recompose the shot.
• Screenbrightnessmaychangedependingonyourspeciedshutter
speed or aperture value. However, screen brightness remains the
samewhentheashisupandthemodeissetto[h].
• To have both the shutter speed and aperture value automatically
adjusted to obtain standard exposure, hold the shutter button
halfway and press the < > button. Note that standard exposure
may not be possible with some settings.
• Images shot at high ISO speeds may look grainy.
• [D]: Manual
• Calculationofstandardexposureisbasedonthespeciedmeteringmethod
(=
69).
• You can customize camera operation so that turning the <7> dial adjusts the
shutter speed and turning the <z> dial adjusts the aperture value (=
96).
Still Images
Adjusting the Flash Output
Choosefromthethreeashlevelsin[D] mode.
1 Enter[D]mode.
 Set the mode dial to [D].
2 Congurethesetting.
 Raisetheash,pressthe<r> button and
immediately turn the <z> dial to choose
theashlevel,andthenpressthe<m>
button.
 Oncethesettingiscomplete,theash
output level is displayed.
[
]: low, [ ]: medium, [ ]: high
• Youcanalsosettheashlevelbychoosing[X] in the FUNC. menu (= 24),
or by accessing MENU (=
25) and choosing [4]tab►[FlashControl]►
[Flash Output].
• Youcansettheashlevelin[M] or [B] mode by accessing MENU
(=
25) and choosing [4]tab►[FlashControl]►[FlashMode]►
[Manual].
• You can also access the [Built-in Flash Settings] MENU screen as follows
(exceptwhenanoptionalexternalashismounted).
- Press and hold the <r> button for at least one second.
- Whentheashisup,pressthe<r> button and immediately press the
<n> button.