PowerShot ELPH 150 IS, PowerShot ELPH 140 IS, PowerShot ELPH 135, IXUS 155, IXUS 150, IXUS 145 Camera User Guide

87
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
2 Installtheles.
 Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
 Installation may take some time,
depending on computer performance and
the Internet connection.
 Click [Finish] or [Restart] on the screen
after installation.
• Using the software, you can update to the latest version, and download new
functions via the Internet (some software excluded).
• The rst time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
Saving Images to a Computer
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some
software excluded).
1 Connect the camera to the
computer.
 With the camera turned off, open the
cover (
). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal (
).
 Insert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
2 Turn the camera on to access
CameraWindow.
 Press the <1> button to turn the camera
on.
 Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
 Windows: Follow the steps introduced
below.
 In the screen that displays, click the [ ]
link to modify the program.