Camera User Guide Y P O • Before use, be sure to read this guide, including the safety precautions. • This guide will familiarize you with how to use the camera correctly. • Keep the guide handy for future reference.
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera dealer. Camera Battery Pack NB-11L (with terminal cover) Interface Cable IFC-400PCU Getting Started Battery Charger CB-2LD/ CB-2LDE Wrist Strap WS-800 Y P O DIGITAL CAMERA Solution Disk Warranty Card • A memory card is not included (p. 2). PDF Manuals C For information about the included software, refer to the ImageBrowser EX User Guide, in PDF format (p. 25).
Preliminary Notes and Legal Information About Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.
Part Names and Conventions in This Guide Lens Speaker Zoom lever Shooting: i (telephoto) / j (wide angle) Playback: k (magnify) / g (index) C Y P O Shutter button Power button Mode switch Microphone Flash Lamp • : Important information you should know • : Notes and tips for expert camera use • (p. xx): Pages with related information (in this example, “xx” represents a page number) • Instructions in this guide apply to the camera under default settings.
Part Names and Conventions in This Guide Tripod socket Screen (LCD monitor) Memory card/battery cover Indicator 1 (Playback) button DC coupler cable port n button Strap mount HDMITM terminal C AV OUT (Audio/video output) / DIGITAL terminal Movie button b (Exposure compensation) / Up button e (Macro) / Left button FUNC.
Contents Special Modes for Other Purposes....................................... 91 Shooting Various Movies ................ 99 Package Contents .............................2 Compatible Memory Cards ................2 Preliminary Notes and Legal Information.......................................3 Part Names and Conventions in This Guide .......................................4 Contents ............................................6 Contents: Basic Operations ...............8 Safety Precautions..............
Contents Printing Images ............................. 177 Using an Eye-Fi Card.................... 190 8 Appendix.........................193 Troubleshooting ............................ 194 C Handling Precautions .................... 197 On-Screen Messages.................... 198 On-Screen Information .................. 200 Functions and Menu Tables .......... 204 Index..............................................
Contents: Basic Operations 4 Shoot z Use camera-determined settings (Auto Mode) ............................. 42 Shooting people well I P Portraits (p. 78) Against Snow (p. 79) Smooth Skin (p. 81) Low Light (p. 79) Under Water (p. 79) Matching specific scenes Night Scenes (p. 78) Applying special effects Vivid Colors (p. 82) Miniature Effect (p. 84) C S Y P O Poster Effect (p. 82) Toy Camera Effect (p. 85) Soft Focus (p. 86) Fish-Eye Effect (p. 83) Monochrome (p. 87) z Focus on faces ....
Contents: Basic Operations 1 View z View images (Playback Mode) ................................................... 122 z Automatic playback (Slideshow)................................................. 132 z On a TV ...................................................................................... 171 z On a computer.............................................................................. 26 z Browse through images quickly.................................................. 126 z Erase images.......
Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death.
Safety Precautions • Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. • Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.
Safety Precautions • In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit. • Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur.
Initial Preparations Prepare for shooting as follows. Attaching the Strap z Thread the end of the strap through the strap hole ( ), and then pull the other end of the strap through the loop on the threaded end ( ). Holding the Camera z Place the strap around your wrist. z When shooting, keep your arms close to your Y P O body and hold the camera securely to prevent it from moving. Do not rest your fingers on the flash.
Initial Preparations Charging the Battery Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. Remove the cover. Insert the battery. z After aligning the S marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). Y P O Charge the battery. z For CB-2LD: Flip out the plug ( CB-2LD ) and plug the charger into a power outlet ( ).
Initial Preparations • To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • For details on charging time and the number of shots and recording time possible with a fully charged battery, see “Specifications” in the Getting Started guide.
Initial Preparations Insert the memory card. z Insert the memory card facing as shown until it clicks into the locked position. z Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera. Terminals Close the cover. z Lower the cover ( ) and hold it down as you slide it, until it clicks into the closed position ( ). Removing the Battery and Memory Card Y P O Remove the battery.
Initial Preparations Setting the Date and Time A screen for setting the date and time is displayed the first time you turn the camera on. Be sure to specify the date and time, which is the basis for dates and times added to your images. Turn the camera on. z Press the power button. X The [Date/Time] screen is displayed. Set the date and time. z Press the qr buttons to choose an option. z Press the op buttons to specify the date and time. Y P O z When finished, press the m button.
Initial Preparations • Unless you set the date, time, and local time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information. • To set daylight saving time (1 hour ahead), choose choose by pressing the op buttons. in step 2 and then Changing the Date and Time Adjust the date and time as follows. Access the camera menu. z Press the n button. Y P O Choose [Date/Time]. z Move the zoom lever to choose the 3 tab.
Initial Preparations Display Language The display language can be changed as needed. Enter Playback mode. z Press the 1 button. Access the setting screen. z Press and hold the m button, and then immediately press the n button. Set the display language. Y P O z Press the opqr buttons to choose a language, and then press the m button. X Once the display language has been set, the setting screen is no longer displayed.
Still Images Movies Trying the Camera Out Follow these instructions to turn the camera on, shoot still images or movies, and then view them. Shooting (Smart Auto) For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on. z Press the power button. X The startup screen is displayed. Enter A mode. z Set the mode switch to A. z Aim the camera at the subject.
Trying the Camera Out Shoot. Shooting Still Images Focus. z Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. AF Frames Y P O Shoot. z Press the shutter button all the way down. C X As the camera shoots, a shutter sound is played, and in low-light conditions, the flash fires automatically. X Keep the camera still until the shutter sound ends.
Trying the Camera Out Elapsed Time X Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. X Frames displayed around any faces that are detected indicate that they are in focus. z Once recording begins, you can take your finger off the movie button. Finish shooting. z Press the movie button again to stop shooting. The camera beeps twice as recording stops. X Recording will stop automatically when the memory card becomes full.
Trying the Camera Out z To access Scroll Display mode, press and hold the qr buttons for at least one second. In this mode, press the qr buttons to browse through images. z To return to single-image display, press the m button. z To browse images grouped by shooting date, press the op buttons in Scroll Display mode. z Movies are identified by a icon. To play movies, go to step 3. Y P O Play movies. z Press the m button, press the op buttons to choose , and then press the m button again.
Trying the Camera Out Erasing the Images You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. Choose an image to erase. z Press the qr buttons to choose an image. Erase the image. z Press the m button, press the op buttons to choose a, and then press the m button again. z After [Erase?] is displayed, press the qr buttons to choose [Erase], and then press the m button. X The current image is now erased.
Included Software, PDF Manuals The software and PDF manuals on the included CD-ROM are introduced below, with instructions for installation, saving images to a computer, and using the PDF manuals. Features of the Included Software After installing the software on the CD-ROM, you can do the following things on your computer.
Included Software, PDF Manuals System Requirements The included software can be used on the following computers. Adobe Reader is required to view the PDF manuals. Windows Windows 7 SP1 Operating System Windows Vista SP2 Windows XP SP3 Computer Computers running one of the above operating systems (preinstalled), with an included USB port and Internet connection Processor Still images: 1.6 GHz or higher, Movies: Core 2 Duo 2.
Included Software, PDF Manuals Installing the Software and PDF Manuals Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. Using the software auto update function, you can update to the latest version and download new functions via the Internet (some software excluded), so be sure to install the software on a computer with an Internet connection. Insert the CD-ROM in the computer’s CD-ROM drive. z Insert the included CD-ROM (DIGITAL CAMERA Solution Disk) (p.
Included Software, PDF Manuals z Insert the larger plug of the interface cable in the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual. Install the files. z Turn the camera on, and follow the on-screen instructions to complete the installation process. X The software will connect to the Internet to update to the latest version and download new functions. Installation may take some time, depending on computer performance and the Internet connection.
Included Software, PDF Manuals Saving Images to a Computer Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. Connect the camera to the computer. z Follow step 3 on p. 27 to connect the camera to a computer. Turn the camera on to access CameraWindow. z Press the 1 button to turn the camera on. z On a Macintosh computer, CameraWindow is displayed when a connection is established between the camera and computer. z For Windows, follow the steps introduced below.
Included Software, PDF Manuals CameraWindow Save the images to the computer. z Click [Import Images from Camera], and then click [Import Untransferred Images]. X Images are now saved to the Pictures folder on the computer, in separate folders named by date. z After images are saved, close CameraWindow, press the 1 button to turn the camera off, and unplug the cable. z For instructions on viewing images on a computer, refer to the ImageBrowser EX User Guide.
Included Software, PDF Manuals Using the PDF Manuals Use the included CD-ROM to install the PDF manuals, and a shortcut for the camera manual will be created on the desktop. Adobe Reader is required to view the PDF manuals. • It may not be possible to install the software and PDF manuals on computers that do not meet the system requirements (p. 26). To view the manuals on these computers, copy the PDF files in the Readme folder on the CD-ROM directly to a computer capable of using Adobe Reader.
Accessories Included Accessories Wrist Strap WS-800 Battery Pack NB-11L* (with terminal cover) Battery Charger CB-2LD/ CB-2LDE* DIGITAL CAMERA Solution Disk Interface Cable IFC-400PCU* Memory Card Power Card Reader Cable Y P O Windows/ Macintosh Computer HDMI Cable HTC-100 AC Adapter Kit ACK-DC90 Flash Unit High-Power Flash HF-DC2 C AV Cable AVC-DC400 Case TV/Video System Canon PictBridgeCompatible Printers Waterproof Case WP-DC330L * Also available for purchase separately.
1 Camera Basics Basic camera operations and features C Y P O 33
On/Off Shooting Mode z Press the power button to turn the camera on and prepare for shooting. z To turn the camera off, press the power button again. Playback Mode z Press the 1 button to turn the camera on and view your shots. z To turn the camera off, press the 1 button again. • To switch to Playback mode from Shooting mode, press the 1 button. • To switch to Shooting mode from Playback mode, press the shutter button halfway (p. 35).
Shutter Button To ensure your shots are in focus, always press the shutter button lightly (halfway) initially. Once the subject is in focus, press the button all the way down to shoot. In this manual, shutter button operations are described as pressing the button halfway or all the way down. Press halfway. (Press lightly to focus.) z Press the shutter button halfway. The camera beeps twice, and AF frames are displayed around image areas in focus. Press all the way down.
Shooting Display Options Press the p button to view other information on the screen, or to hide the information. For details on the information displayed, see p. 200. Information is displayed No information is displayed • Screen brightness is automatically increased by the night display function when you are shooting under low light, making it easier to check how shots are composed. However, on-screen image brightness may not match the brightness of your shots.
FUNC. Menu Configure commonly used functions through the FUNC. menu as follows. Note that menu items and options vary depending on the shooting mode (pp. 206 – 207) or playback mode (p. 211). Access the FUNC. menu. z Press the m button. Choose a menu item. z Press the op buttons to choose a menu item, and then press the m or r button. z In some menu items, functions can be Options Menu Items specified simply by pressing the m or r button, or another screen is displayed for configuring the function.
n Menu Configure a variety of camera functions through other menus as follows. Menu items are grouped by purpose on tabs, such as shooting (4), playback (1), and so on. Note that available settings vary depending on the selected shooting or playback mode (pp. 208 – 211). Access the menu. z Press the n button. Choose a tab. z Move the zoom lever or press the qr buttons to choose a tab. Choose a setting. z Press the op buttons to choose a setting.
Indicator Display The indicator on the back of the camera (p. 5) lights up or blinks depending on the camera status. Color Indicator Status On Green Blinking Camera Status Connected to a computer (p. 29), or display off Starting up, recording/reading/transmitting images, or shooting long exposures (p. 95) • When the indicator blinks green, never turn the camera off, open the memory card/battery cover, or shake or jolt the camera, which may corrupt images or damage the camera or memory card.
C 40 Y P O
2 Smart Auto Mode Convenient mode for easy shots with greater control over shooting C Y P O 41
Still Images Movies Shooting in Smart Auto Mode For fully automatic selection at optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on. z Press the power button. X The startup screen is displayed. Enter A mode. z Set the mode switch to A. z Aim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
Shooting in Smart Auto Mode Shoot. Shooting Still Images Focus. z Press the shutter button halfway. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. z Several AF frames are displayed when multiple areas are in focus. AF Frames Y P O Shoot. z Press the shutter button all the way down. X As the camera shoots, a shutter sound is C played, and in low-light conditions, the flash fires automatically. z Keep the camera still until the shutter sound ends.
Shooting in Smart Auto Mode Shooting Movies Start shooting. z Press the movie button. The camera beeps Elapsed Time once as recording begins, and [ Rec] is displayed with the elapsed time. X Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. X Frames displayed around any faces that are detected indicate that they are in focus. z Once recording begins, you can take your finger off the movie button. Resize the subject and recompose the shot as needed.
Shooting in Smart Auto Mode Still Images/Movies • To restore camera sound if you have accidentally deactivated it (by holding the p button down while turning the camera on), press the n button and choose [Mute] on the 3 tab, and then press the qr buttons to choose [Off]. Still Images • A flashing icon warns that images are more likely to be blurred by camera shake. In this case, attach the camera to a tripod or take other measures to keep it still.
Shooting in Smart Auto Mode Movies • The camera may become warm when shooting movies repeatedly over an extended period. This does not indicate damage. • Keep your fingers away from the microphone while shooting movies. Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled. Microphone • Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded.
Shooting in Smart Auto Mode Scene Icons In A mode, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color. Depending on the scene, continuous images may be shot (p. 48).
Shooting in Smart Auto Mode • The background color of , , , , and is dark blue, and the background color of is orange. • When shooting movies, only People, Other Subjects, and At Close Range icons will be displayed. • When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babies (Smiling), Babies (Sleeping), Children, Other Subjects (In Motion) icons will not be displayed. • When the drive mode is set to (p. 109), and when [Hg Lamp Corr.
Shooting in Smart Auto Mode • In some scenes, expected images may not be saved, and images may not look as expected. • Focus, image brightness, and color are determined by the first shot. • When you want to shoot single images only, press the m button, choose in the menu, and then choose . Image Stabilization Icons Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in A mode.
Shooting in Smart Auto Mode On-Screen Frames A variety of frames are displayed once the camera detects subjects you are aiming the camera at. • A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus. However, if the camera detects subject movement, only the white frame will remain on the screen.
Common, Convenient Features Still Images Movies Zooming In Closer on Subjects (Digital Zoom) When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 20x enlargement. Move the zoom lever toward i. z Hold the lever until zooming stops. X Zooming stops at the largest possible zoom factor (where the image is not noticeably grainy), which is displayed when you release the zoom lever. Zoom Factor Move the zoom lever toward i again.
Common, Convenient Features Still Images Movies Using the Self-Timer With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button. Configure the setting. z Press the m button, choose in the menu, and then choose the ] option (p. 37). X Once the setting is complete, ] is displayed. C Y P O Shoot.
Common, Convenient Features Using the Self-Timer to Avoid Camera Shake This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot. Configure the setting. z Follow step 1 on p. 52 and choose [. X Once the setting is complete, [ is displayed. z Follow step 2 on p. 52 to shoot.
Common, Convenient Features Still Images Deactivating the Flash Prepare the camera for shooting without the flash as follows. Configure the setting. z Press the r button, press the qr buttons to choose !, and then press the m button. X Once the setting is complete, ! is displayed. z To restore the original setting, repeat this process but choose Y P O .
Common, Convenient Features Still Images Adding the Shooting Date and Time The camera can add the shooting date and time to images in the lower-right corner. However, note that these cannot be removed. Confirm beforehand that the date and time are correct (p. 17). Configure the setting. z Press the n button, choose [Date Stamp] on the 4 tab, and then choose the desired option (p. 38). X Once the setting is complete, [DATE] is displayed. C Y P O Shoot.
Common, Convenient Features Still Images Choosing Subjects to Focus On (Tracking AF) Shoot after choosing a subject to focus on as follows. Specify Tracking AF. z Press the o button. X is displayed in the center of the screen. Choose a subject to focus on. z Aim the camera so that is on the desired subject, and then press the shutter button halfway. X A blue frame is displayed, and the camera will keep the subject in focus and image brightness adjusted (Servo AF). Y P O Shoot.
Still Images Using Face ID If you register a person ahead of time, the camera will detect that person’s face, and prioritize focus, brightness, and color for that person when shooting. In A mode, the camera can detect babies and children based on registered birthdays and optimize settings for them when shooting. This function is also useful when searching for a specific registered person among a large number of images (p. 126).
Using Face ID z Choose [Add to Registry], and then choose [Add a New Face]. Register face information. Y P O z Aim the camera so that the face of the person you want to register is inside the gray frame at the center of the screen. z A white frame on the person’s face indicates that the face is recognized. Make sure a white frame is displayed on the face, and then shoot. z If the face is not recognized, you cannot register face information. C Save the settings.
Using Face ID X The [Edit Profile] screen is displayed. Enter a name. z Press the m button. z Press the opqr buttons to choose a character, and then press the m button to enter it. z Up to 10 characters can be used. z Choose or and press the m button to move the cursor. z Choose and press the m button to delete the previous character. z Press the n button to return to the edit profile screen. C Y P O Enter a birthday. z Press the op buttons to choose [Birthday], and then press the m button.
Using Face ID Continue registering face information. z To register up to 4 more points of face information (expressions or angles), repeat steps 2 – 3. z Registered faces are more easily recognized if you add a variety of face information. In addition to a head on angle, add a slight side angle, a shot when smiling, and shots inside and outside. • The flash will not fire when following step 2. • If you do not register a birthday in step 5, Babies or Children icons (p. 47) will not display in A mode.
Using Face ID Shooting If you register a person ahead of time, the camera will prioritize that person as the main subject, and optimize focus, brightness, and color for that person when shooting. X When you point the camera toward a subject, the names of up to 3 registered people will be displayed when they are detected. z Shoot. X Displayed names will be recorded in still images. Even if people are detected, but their names are not displayed, the names (up to 5 people) will be recorded in the image.
Using Face ID Checking and Editing Registered Information Checking Registered Face ID Information Access the [Check/Edit Info] screen. z Following step 1 on p. 57, choose [Check/ Edit Info] and press the m button. Choose a person to check. z Press the opqr buttons to choose a person, and then press the m button. Y P O Check the registered information. C z Press the op buttons to choose an item, and then press the m button. z Check the registered information.
Using Face ID Input changes. z Press the op buttons to choose an item, and follow steps 4 – 5 on p. 59 to input changes. • Even if you change names in [Edit Profile], the names recorded in previously shot images will remain the same. • You can check and erase registered face information by choosing [Face Info List] on the screen in step 3. • You can use the included software to edit registered names.
Using Face ID Access the face info screen. z Read the message that displays, press the qr buttons to choose [OK], and then press the m button. z The face info screen is displayed. Choose the face info to overwrite. z Press the opqr buttons to choose the face info to overwrite, and then press the m button. Register face information. Y P O z Follow steps 2 – 3 on p. 58 to shoot, and then register the new face information.
Using Face ID Choose the name of the person whose face info you want to erase. z Press the opqr buttons to choose the name of the person whose face info you want to erase, and then press the m button. Access the [Face Info List] screen. z Press the op buttons to choose [Face Info List], and then press the m button. Choose the face info to erase. Y P O z Press the m button, press the opqr buttons to choose the face info you want to erase, and then press the m button.
Using Face ID Choose the name of the person whose info you want to erase. z Press the opqr buttons to choose the name of a person to erase, and then press the m button. z After [Erase?] is displayed, press the qr buttons to choose [OK], and then press the m button. • If you erase a registered person’s info, you will not be able to display their name (p. 124), overwrite their info (p. 63), or search images for them (p. 126). • You can also erase a person’s name only from images (p. 130).
Image Customization Features Still Images Changing the Aspect Ratio Change the image aspect ratio (ratio of width to height) as follows. Configure the setting. z Press the m button, choose in the menu, and choose the desired option (p. 37). X Once the setting is complete, the screen aspect ratio will be updated. z To restore the original setting, repeat this process but choose . Y P O Same aspect ratio as HDTVs, used for display on widescreen HDTVs or similar display devices.
Image Customization Features Still Images Changing Image Resolution (Size) Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see “Specifications” in the Getting Started guide. Configure the setting. z Press the m button, choose in the menu, and choose the desired option (p. 37). X The option you configured is now displayed. z To restore the original setting, repeat this process but choose .
Image Customization Features Still Images Red-Eye Correction Red-eye that occurs in the flash photography can be automatically corrected as follows. Access the [Flash Settings] screen. z Press the n button, choose [Flash Settings] on the 4 tab, and then press the m button (p. 38). Y P O Configure the setting. C z Choose [Red-Eye Corr.], and then choose [On] (p. 38). X Once the setting is complete, R is displayed. z To restore the original setting, repeat this process but choose [Off].
Image Customization Features Still Images Correcting Greenish Image Areas from Mercury Lamps In shots of evening scenes with subjects illuminated by mercury lamps, the subjects or background may appear to have a greenish tinge. This greenish tinge can be corrected automatically when shooting, using Multi-area White Balance. Configure the setting. z Press the n button, choose [Hg Lamp Corr.] on the 4 tab, and then choose [On] (p. 38). X Once the setting is complete, is displayed.
Image Customization Features Movies Changing Movie Image Quality 3 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see “Specifications” in the Getting Started guide. Configure the setting. z Press the m button, choose in the menu, and choose the desired option (p. 37). X The option you configured is now displayed. z To restore the original setting, repeat this process but choose .
Helpful Shooting Features Still Images Movies Displaying Grid Lines Grid lines can be displayed on the screen for vertical and horizontal reference while shooting. Configure the setting. z Press the n button, choose [Grid Lines] on the 4 tab, and then choose [On] (p. 38). X Once the setting is complete, grid lines are displayed on the screen. z To restore the original setting, repeat this process but choose [Off]. Y P O • Grid lines are not recorded in your shots.
Helpful Shooting Features Still Images Magnifying the Area in Focus You can check the focus by pressing the shutter button halfway to enlarge the image area in the AF frame. Configure the setting. z Press the n button, choose [AF-Point Zoom] on the 4 tab, and then choose [On] (p. 38). Y P O Check the focus. C z Press the shutter button halfway. The face detected as the main subject is now magnified. z To restore the original setting, choose [Off] in step 1.
Helpful Shooting Features Still Images Checking for Closed Eyes is displayed when the camera detects that people may have closed their eyes. Choose . z Press the m button, choose and choose in the menu, . Y P O Configure the setting. C z Press the n button, choose [Blink Detection] on the 4 tab, and then choose [On] (p. 38). Shoot. X A frame, accompanied by , is displayed when the camera detects a person whose eyes are closed. z To restore the original setting, choose [Off] in step 2.
Still Images Customizing Camera Operation Customize shooting functions on the 4 tab of the menu as follows. For instructions on menu functions, see “n Menu” (p. 38). Deactivating the AF Assist Beam You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions. Configure the setting. z Press the n button, choose [AF-assist Beam] on the 4 tab, and then choose [Off] (p. 38).
Customizing Camera Operation Changing the Image Display Period After Shots Change how long images are displayed after shots as follows. Configure the setting. z Press the n button, choose [Review] on the 4 tab, and then choose the desired option (p. 38). z To restore the original setting, repeat this process but choose [2 sec.]. 2 – 10 sec. Displays images for the specified time. Hold Displays images until you press the shutter button halfway. Off No image display after shots.
3 Other Shooting Modes Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured Y P O using special functions C 77
Still Images Movies Specific Scenes Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. Enter 4 mode. z Set the mode switch to 4. Choose a shooting mode. z Press the m button, choose G in the menu, and then choose a shooting mode (p. 37). Shoot. Y P O Movies Still Images I Shoot portraits (Portrait) C z Take shots of people with a softening effect.
Specific Scenes Still Images Shoot under low light (Low Light) z Shoot with minimal camera shake and subject blur even in low-light conditions. Still Images Movies S Shoot under water (Underwater) z Natural-colored shots of sea life and underwater scenery, when you use an optional waterproof case (p. 170). z This mode can correct white balance and match the effect of using a commercially available color-compensating filter (p. 80).
Specific Scenes Still Images Movies Correcting White Balance White balance can be manually corrected in S mode (p. 79). This adjustment can match the effect of using a commercially available color-compensating filter. Choose S. z Follow steps 1 – 2 on p. 78 and choose S. Choose white balance. z Press the m button, choose in the menu, and press the m button again. Y P O Adjust the setting. z Move the zoom lever to adjust the correction level for B and A, and then press the m button.
Specific Scenes Still Images Making Skin Look Smoother (Smooth Skin) You can apply a smoothening effect when shooting images of people. The effect level and color ([Lighter Skin Tone], [Darker Skin Tone]) can be chosen as follows. Choose . z Follow steps 1 – 2 on p. 78 and choose . Access the setting screen. z Press the p button. Configure the setting. z Press the op buttons to choose an item. Choose the effect level by pressing the qr buttons, and then press the m button.
Still Images Movies Applying Special Effects Add a variety of effects to images when shooting. Choose a shooting mode. z Follow steps 1 – 2 on p. 78 to choose a shooting mode. Shoot. • In , , , , , and modes, try taking some test shots first, to make sure you obtain the desired results. Still Images Movies Shoot in vivid colors (Super Vivid) Y P O z Shots in rich, vivid colors. C Still Images Movies Posterized shots (Poster Effect) z Shots that resemble an old poster or illustration.
Applying Special Effects Still Images Shooting with a Fish-Eye Lens Effect (Fish-eye Effect) Shoot with the distorting effect of a fish-eye lens. Choose . z Follow steps 1 – 2 on p. 78 and choose . Choose an effect level. z Press the p button, press the qr buttons to choose an effect level, and then press the m button. X A preview is shown of how your shot will look with the effect applied. Y P O Shoot.
Applying Special Effects Still Images Movies Shots Resembling Miniature Models (Miniature Effect) Creates the effect of a miniature model, by blurring image areas above and below your selected area. You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded. Choose . z Follow steps 1 – 2 on p. 78 and choose .
Applying Special Effects Playback Speed and Estimated Playback Time (for OneMinute Clips) Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. • The zoom is not available when shooting movies. Be sure to set the zoom before shooting. • To switch the orientation of the frame to vertical, press the qr buttons in step 2. To move the frame, press the qr buttons again. To return the frame to horizontal orientation, press the op buttons.
Applying Special Effects Standard Shots resemble toy camera images. Warm Images have a warmer tone than with [Standard]. Cool Images have a cooler tone than with [Standard]. Still Images Shooting With a Soft Focus Effect This function allows you to shoot images as if a soft focus filter is attached to the camera. You can adjust the effect level as desired. Choose . z Follow steps 1 – 2 on p. 78 and choose . Choose an effect level.
Applying Special Effects Still Images Movies Shooting in Monochrome Shoot images in black and white, sepia, or blue and white. Choose . z Follow steps 1 – 2 on p. 78 and choose . Choose a color tone. z Press the p button, press the qr buttons to choose a color tone, and then press the m button. X A preview is shown of how your shot will look with the effect applied. Shoot. B/W Black and white shots. Sepia Sepia tone shots. Blue Blue and white shots.
Applying Special Effects Still Images Movies Shooting with Color Accent Choose a single image color to keep and change other colors to black and white. Choose T. z Follow steps 1 – 2 on p. 78 and choose T. Access the setting screen. z Press the p button. X The original image and the Color Accent image are displayed one after another. X By default, green is the color that will be kept. Specify the color. Y P O z Position the center frame over the color to keep, and then press the q button.
Applying Special Effects Still Images Movies Shooting with Color Swap You can replace one image color with another before shooting. Note that only one color can be replaced. Choose Y. z Follow steps 1 – 2 on p. 78 and choose Y. Access the setting screen. z Press the p button. Y P O X The original image and the Color Swap image are displayed one after another. X By default, green will be replaced with gray. C Specify the color to replace.
Applying Special Effects Specify the new color. z Position the center frame over the new color, and then press the r button. X The specified color is recorded. Specify the range of colors to replace. z Press the op buttons to adjust the range. z To replace only your specified color, choose a large negative value. To replace colors similar to your specified color as well, choose a large positive value. z Press the m button to return to the shooting screen.
Special Modes for Other Purposes Still Images Movies Auto Clip Recording (Movie Digest) You can make a short movie of a day just by shooting still images. Before each shot, the camera will automatically record a movie clip of the scene. Each clip recorded that day is combined into a single file. Choose . z Follow steps 1 – 2 on p. 78 and choose . Shoot. z To shoot a still image, press the shutter button all the way down.
Special Modes for Other Purposes Still Images Auto Shooting After Face Detection (Smart Shutter) Auto Shooting After Smile Detection The camera shoots automatically after detecting a smile, even without you pressing the shutter button. Choose . z Follow steps 1 – 2 on p. 78 and choose , and then press the p button. z Press the qr buttons to choose , and then press the m button. X The camera now enters shooting standby mode, and [Smile Detection on] is displayed. Y P O Aim the camera at a person.
Special Modes for Other Purposes Still Images Using the Wink Self-Timer Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected. Choose . z Follow steps 1 – 2 on p. 78 and choose and then press the p button. z Press the qr buttons to choose then press the m button. , , and Compose the shot and press the shutter button halfway. z Make sure a green frame is displayed around the face of the person who will wink.
Special Modes for Other Purposes Still Images Using the Face Self-Timer The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area (p. 112). This is useful when including yourself in group photos or similar shots. Choose . z Follow steps 1 – 2 on p. 78 and choose and then press the p button. z Press the qr buttons to choose then press the m button. , , and Compose the shot and press the shutter button halfway.
Special Modes for Other Purposes • Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later. • To change the number of shots, press the op buttons after choosing in step 1. [Blink Detection] (p. 74) is only available for the final shot. Still Images Shooting Long Exposures (Long Shutter) Specify a shutter speed of 1 – 15 seconds to shoot long exposures.
Special Modes for Other Purposes Still Images High-Speed Continuous Shooting (High-speed Burst) You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see “Specifications” in the Getting Started guide. Choose . z Follow steps 1 – 2 on p. 78 and choose . Shoot. X Hold the shutter button all the way down to shoot continuously. Y P O • The resolution is (2304 x 1728) and cannot be changed.
Special Modes for Other Purposes • Grouped images can be played back individually (p. 128) and ungrouped (p. 129). • Protecting (p. 135) a grouped image will protect all images in the group. • Grouped images can be viewed individually when played back using Image Search (p. 126) or Smart Shuffle (p. 133). In this case, images are temporarily ungrouped. • Grouped images cannot have their Face ID info edited (p. 129), be tagged as favorites (p. 144), edited (pp. 142 – 152), categorized (p.
Special Modes for Other Purposes Still Images Shooting Stitch Assist Images Shoot a large subject by taking multiple shots at various positions, and then use the included software to combine them into a panorama. Choose x or v. z Follow steps 1 – 2 on p. 78 and choose x or v. Take the first shot. X The first shot will determine the exposure and white balance. Y P O Take additional shots. z Compose the second shot so that it partially C overlaps the image area of first shot.
Movies Shooting Various Movies Shooting Super Slow Motion Movies You can shoot fast-moving subjects for playback later in slow motion. Note that sound is not recorded. Choose . z Follow steps 1 – 2 on p. 78 and choose . Choose a frame rate. z Press the m button, choose in the menu, and choose the desired frame rate (p. 37). X The option you configured is now displayed. Y P O Shoot. z Press the movie button. X A bar showing the elapsed time is displayed. Maximum clip length is approx. 30 sec.
Shooting Various Movies Shooting iFrame Movies Shoot movies that can be edited with iFrame-compatible software or devices. You can quickly edit, save, and manage iFrame movies using the included software. Choose . z Follow steps 1 – 2 on p. 78 and choose . X Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. Shoot. z Press the movie button. z To stop movie recording, press the movie Y P O button again. • The resolution is (p.
4 G mode More discerning shots, in your preferred shooting style C Y P O • Instructions in this chapter apply to the camera in G mode, with the mode switch set to 4. • G: Program AE; AE: Auto Exposure • Before using a function introduced in this chapter in modes other than G, make sure the function is available in that mode (pp. 204 – 209).
Still Images Movies Shooting in Program AE Mode (G Mode) You can customize many function settings to suit your preferred shooting style. Enter G mode. z Follow steps 1 – 2 on p. 78 and choose G. Customize the settings as desired (pp. 103 – 119), and then shoot. • If adequate exposure cannot be obtained when you press the shutter button halfway, shutter speeds and aperture values are displayed in orange. To obtain adequate exposure, try adjusting the following settings. - Activate the flash (p.
Image Brightness (Exposure Compensation) Still Images Movies Adjusting Image Brightness (Exposure Compensation) The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –2 to +2. z Press the o button. As you watch the screen, press the qr buttons to adjust the brightness. z When shooting movies, shoot with the exposure compensation bar displayed. When shooting still images, press the m button to display the set exposure compensation amount, and then shoot.
Image Brightness (Exposure Compensation) Still Images Changing the Metering Method Adjust the metering method (how brightness is measured) to suit shooting conditions as follows. z Press the m button, choose in the menu, and choose the desired option (p. 37). X The option you configured is now displayed. Evaluative For typical shooting conditions, including backlit shots. Automatically adjusts exposure to match the shooting conditions.
Image Brightness (Exposure Compensation) • To view the automatically set ISO speed when the camera is set to , press the shutter button halfway. • Although choosing a lower ISO speed may reduce image graininess, there may be a greater risk of subject blurriness in some shooting conditions. • Choosing a higher ISO speed will increase shutter speed, which may reduce subject blurriness and increase the flash range. However, shots may look grainy.
Color and Continuous Shooting Still Images Movies Adjusting White Balance By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. z Press the m button, choose in the menu, and choose the desired option (p. 37). X The option you configured is now displayed. Auto 106 Automatically sets the optimal white balance for the shooting conditions. Y P O Day Light For shooting outdoors in fair weather.
Color and Continuous Shooting Custom White Balance For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot. z Follow the steps in “Adjusting White Balance” (p. 106) to choose . z Aim the camera at a plain white subject, so that the entire screen is white. Press the n button.
Color and Continuous Shooting Still Images Movies Changing Image Color Tones (My Colors) Change image color tones as desired, such as converting images to sepia or black and white. z Press the m button, choose in the menu, and choose the desired option (p. 37). X The option you configured is now displayed. My Colors Off – Vivid Emphasizes contrast and color saturation, making images sharper. Neutral Tones down contrast and color saturation for subdued images. Sepia Creates sepia tone images.
Color and Continuous Shooting Custom Color Choose the desired level of image contrast, sharpness, color saturation, red, green, blue, and skin tones in a range of 1 – 5. Access the setting screen. z Follow the steps in “Changing Image Color Tones (My Colors)” (p. 108) to choose and then press the n button. , Configure the setting. z Press the op buttons to choose an option, and then press the qr buttons to specify the value.
Shooting Range and Focusing • Cannot be used with the self-timer (p. 52) or [Blink Detection] (p. 74). • During continuous shooting, focus and exposure are locked at the position/level determined when you pressed the shutter button halfway. • Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position. • As more shots are taken, shooting may slow down. • Shooting may slow down if the flash fires. • If you use Face ID (p.
Shooting Range and Focusing Still Images Shooting Distant Subjects (Infinity) To restrict the focus to distant subjects, set the camera to u. For details on the focusing range, see “Specifications” in the Getting Started guide. z Press the q button, press the qr buttons to choose u, and then press the m button. X Once the setting is complete, u is displayed. Still Images Movies Digital Tele-Converter Y P O The focal length of the lens can be increased by approximately 1.6x or 2.0x.
Shooting Range and Focusing Still Images Movies Changing the AF Frame Mode Change the AF (auto focus) frame mode to suit the shooting conditions as follows. z Press the n button, choose [AF Frame] on the 4 tab, and then choose the desired option (p. 38). Still Images Face AiAF Y P O Movies • Detects people’s faces, and then sets the focus, exposure (evaluative metering only), and white balance ( only).
Shooting Range and Focusing • If faces are not detected, or when only gray frames are displayed (without a white frame), up to nine green frames are displayed in the areas in focus when you press the shutter button halfway. • If faces are not detected when Servo AF (p. 115) is set to [On], the AF frame is displayed in the center of the screen when you press the shutter button halfway.
Shooting Range and Focusing Shoot. z Press the shutter button halfway. changes to a blue , which follows the subject as the camera continues to adjust the focus and exposure (Servo AF) (p. 115). z Press the shutter button all the way down to shoot. X Even after your shot, is still displayed and the camera continues to track the subject. • [Servo AF] (p. 115) is set to [On] and cannot be changed.
Shooting Range and Focusing Still Images Recomposing Shots While the Focus is Locked As long as you keep the shutter button pressed halfway, the focus and exposure are locked. You can recompose shots as needed before shooting. This feature is called Focus Lock. Focus. z Aim the camera so that the subject is centered, and then press the shutter button halfway. z Confirm that the AF frame displayed around the subject is green. Recompose the shot.
Shooting Range and Focusing • Focusing may not be possible in some shooting conditions. • In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode. • If adequate exposure cannot be obtained, shutter speeds and aperture values are displayed in orange. Release the shutter button, and then press it halfway again. • AF lock shooting is not available.
Still Images Flash Activating Flash You can have the flash fire for each shot. For details on the flash range, see “Flash Range” (see “Specifications” in the Getting Started guide). z Press the r button, press the qr buttons to choose h, and then press the m button. X Once the setting is complete, h is displayed.
Flash Shooting with the FE Lock Just as with the AE lock (p. 103), you can lock the exposure for the flash shots. Set the flash to h (p. 117). Lock the flash exposure. z Aim the camera at the subject to shoot with the exposure locked. With the shutter button pressed halfway, press the o button. X The flash fires, and when ( is displayed, the flash output level is retained. z To unlock FE, release the shutter button and press the o button again. In this case, ( is no longer displayed.
Other Settings Still Images Changing the Compression Ratio (Image Quality) Choose from two compression ratios, as follows: (Super Fine), (Fine). For guidelines on how many shots at each compression ratio can fit on a memory card, see “Specifications” in the Getting Started guide. Configure the setting. z Press the m button, choose in the menu, and choose the desired option (p. 37). X The option you configured is now displayed.
Other Settings • If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off]. Movies Deactivating Powered IS Powered IS reduces slow camera shake that may occur when recording telephoto movies. However, this option may not produce the expected results when used for the stronger camera shake that may occur when shooting while walking or when moving the camera to match subject movement.
5 Playback Mode Have fun reviewing your shots, and browse or edit them in many ways Y P O • To prepare the camera for these operations, press the 1 button to enter Playback mode. C • It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
Still Images Movies Viewing After shooting images or movies, you can view them on the screen as follows. Enter Playback mode. z Press the 1 button. X Your last shot is displayed. Browse through your images. z To view the previous image, press the q button. To view the next image, press the r button. C Y P O z To access Scroll Display mode, press and hold the qr buttons for at least one second. In this mode, press the qr buttons to browse through images.
Viewing Play movies. z To start playback, press the m button, press the op buttons to choose press the m button again. , and then Adjust the volume. z Press the op buttons to adjust the volume. Pause playback. z To pause playback, press the m button. The movie control panel is displayed. To resume playback, press the qr buttons to choose , and then press the m button. X After the movie is finished, is displayed. • To switch to Shooting mode from Playback mode, press the shutter button halfway.
Viewing Still Images Movies Switching Display Modes Press the p button to view other information on the screen, or to hide the information. For details on the information displayed, see p. 202. No information is displayed Simple Information Display Detailed Information Display Enables you to check the focus (p. 125)* *Not shown for movies. Y P O • Switching display modes by pressing the p button is also possible immediately after you shoot, while your shot is displayed.
Viewing Still Images Checking the Focus To check the focus of your shots, you can magnify the area of the image that was in the AF frame at the time of shooting. Access Focus Check. z Press the p button (p. 124). X A white frame is displayed where the AF frame was when the focus was set. X Gray frames are displayed over faces detected later, in Playback mode. X The portion of the image in the orange frame is magnified. Switch frames. Y P O z Move the zoom lever toward k once.
Browsing and Filtering Images Still Images Movies Navigating Through Images in an Index By displaying multiple images in an index, you can quickly find the images you are looking for. Display images in an index. z Move the zoom lever toward g to display images in an index. Moving the lever again will increase the number of images shown. z To display fewer images, move the zoom lever toward k. Fewer images are shown each time you move the lever. Choose an image.
Browsing and Filtering Images Choose a search condition. z Press the m button, choose in the menu, and choose a condition (p. 37). View the image search results. z Choose the type of images to view by pressing the opqr buttons, and then press the m button. (Except when searching images by .) X Images matching the search conditions will display inside a yellow frame. z Press the qr buttons to view image search results. z Choose in step 1 to cancel image search.
Browsing and Filtering Images Movies Viewing Movie Digest Movies Movies created in mode (p. 91) can be viewed by date. Choose a movie. z Press the m button, choose in the menu, and choose the date (p. 37). Play the movie. z Press the m button to start playback. Still Images Viewing Individual Images in a Group Y P O Grouped images shot in mode (p. 96) are generally displayed together, but they can also be viewed individually. Choose an image group.
Editing Face ID Information View individual images in the group. z Pressing the qr buttons will display only images in the group. z To cancel group playback, press the m button, choose in the menu, and press the m button again (p. 37). • During group playback (step 3), you can use the menu functions accessed by pressing the m button. You can also browse through images quickly (“Navigating Through Images in an Index” (p. 126)) and magnify them (“Magnifying Images” (p. 131)).
Editing Face ID Information Choose an image. z Follow the procedure on p. 123 to choose an image, and then press the m button. z An orange frame is displayed around the selected face. When multiple names are displayed in an image, press the qr buttons to choose the name to change, and press the m button. Choose the item to edit. z Press the opqr buttons to choose [Overwrite], and then press the m button. Choose the name of the person to change. Y P O z Follow step 2 on p.
Image Viewing Options Still Images Magnifying Images Magnify an image. z Moving the zoom lever toward k will zoom in and magnify the image, and is displayed. You can magnify images up to about 10x by continuing to hold the zoom lever. z To zoom out, move the zoom lever toward g. You can return to single-image display by continuing to hold it. Move the display position and switch images as needed. Approximate Position of Displayed Area Y P O z To move the display position, press the opqr buttons.
Image Viewing Options Still Images Movies Viewing Slideshows Automatically play back images from a memory card as follows. Each image is displayed for about three seconds. Choose a slideshow transition and start playback. z Press the m button, choose . in the menu, and choose the desired option (p. 37). X The slideshow will start a few seconds after [Loading image...] is displayed. z Press the n button to stop the slideshow. Y P O • The camera’s power-saving functions (p.
Image Viewing Options Changing Slideshow Settings You can set up slideshows to repeat, and you can change the transitions between images and the display duration of each image. Choose from six transition effects between images. Access the setting screen. z Press the n button and choose [Slideshow] on the 1 tab (p. 38). Configure the settings. z Choose a menu item to configure, and then choose the desired option (p. 38). z To start the slideshow with your settings, choose [Start] and press the m button.
Image Viewing Options Choose an image. z Press the opqr buttons to choose the image you want to view next. X Your chosen image is displayed in the center, surrounded by the next four candidate images. z For full-screen display of the center image, press the m button. To restore the original display, press the m button again. z Press the n button to restore singleimage display. • Only still images shot with this camera are played back using Smart Shuffle.
Still Images Movies Protecting Images Protect important images to prevent accidental erasure by the camera (p. 139). z Press the m button, and then choose : in the menu (p. 37). [Protected] is displayed. z To cancel protection, repeat this process and choose : again, and then press the m button. • Protected images on a memory card will be erased if you format the card (pp. 160, 161). • Protected images cannot be erased by the camera. To erase them, cancel protection settings first.
Protecting Images Choosing Images Individually Choose [Select]. z Following step 2 on p. 135, choose [Select] and press the m button. Choose an image. z Press the qr buttons to choose an image, and then press the m button. is displayed. z To cancel protection, press the m button again. is no longer displayed. z Repeat this process to specify other images. Protect the images. z Press the n button. A confirmation Y P O message is displayed.
Protecting Images Selecting a Range Choose [Select Range]. z Following step 2 on p. 135, choose [Select Range] and press the m button. Choose a starting image. z Press the m button. z Press the qr buttons to choose an image, and then press the m button. C Y P O Choose an ending image. z Press the r button to choose [Last image], and then press the m button. z Press the qr buttons to choose an image, and then press the m button. z Images before the first image cannot be selected as the last image.
Protecting Images Protect the images. z Press the p button to choose [Protect], and then press the m button. Specifying All Images at Once Choose [Select All Images]. z Following step 2 on p. 135, choose [Select All Images] and press the m button. Protect the images. z Press the op buttons to choose [Protect], Y P O and then press the m button. C • To cancel protection for groups of images, choose [Unlock] in step 4 of “Selecting a Range” or in step 2 of “Specifying All Images at Once”.
Still Images Movies Erasing Images You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. Choose an image to erase. z Press the qr buttons to choose an image. Erase the image. z Press the m button, and then choose a in the menu (p. 37). z After [Erase?] is displayed, press the qr buttons to choose [Erase], and then press the m button. X The current image is now erased.
Erasing Images Choosing Images Individually Choose [Select]. z Following step 2 on p. 139, choose [Select] and press the m button. Choose an image. z Once you follow step 2 on p. 136 to choose an image, is displayed. z To cancel erasure, press the m button again. is no longer displayed. z Repeat this process to specify other images. Erase the image. z Press the n button. A confirmation Y P O message is displayed. z Press the qr buttons to choose [OK], and then press the m button.
Erasing Images Specifying All Images at Once Choose [Select All Images]. z Following step 2 on p. 139, choose [Select All Images] and press the m button. Erase the images. z Press the qr buttons to choose [OK], and then press the m button.
Still Images Movies Rotating Images Change the orientation of images and save them as follows. Choose \. z Press the m button, and then choose \ in the menu (p. 37). Rotate the image. z Press the q or r button, depending on the desired direction. Each time you press the button, the image is rotated 90°. Press the m button to complete the setting. Using the Menu C Y P O Choose [Rotate]. z Press the n button, and then choose [Rotate] on the 1 tab (p. 38). Rotate the image.
Rotating Images Deactivating Auto Rotation Follow these steps to deactivate automatic rotation by the camera, which rotates images shot in vertical orientation so they are displayed vertically on the camera. z Press the n button, choose [Auto Rotate] on the 1 tab, and then choose [Off] (p. 38). • Images cannot be rotated (p. 142) when you set [Auto Rotate] to [Off]. Additionally, images already rotated will be displayed in the original orientation. • In Smart Shuffle (p.
Still Images Movies Image Categories You can tag images as favorites and assign them to My Category (p. 145). By choosing a category in image search, you can restrict the following operations to all of those images. • Viewing (p. 122), Viewing Slideshows (p. 132), Protecting Images (p. 135), Erasing Images (p. 139), Adding Images to the Print List (DPOF) (p. 184), Adding Images to a Photobook (p. 188) Tagging Images as Favorites z Press the m button, and then choose in the menu (p. 37).
Image Categories Finish the setup process. z Press the n button. A confirmation message is displayed. z Press the qr buttons to choose [OK], and then press the m button. • Images will not be tagged as favorites if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3. • Favorite images will have a three-star rating ( ) when transferred to computers running Windows 7 or Windows Vista. (Does not apply to movies.
Image Categories Finish the setup process. z Press the n button. A confirmation message is displayed. z Press the qr buttons to choose [OK], and then press the m button. • Images will not be assigned to a category if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3. Using the Menu Access the setting screen. z Press the n button, and then choose [My Category] on the 1 tab (p. 38). C Y P O Choose a selection method.
Image Categories Choose a category. z Press the op buttons to choose a category, and then press the m button. is displayed. z To cancel selection, press the m button again. is no longer displayed. z Repeat this process to choose additional images. Finish the setup process. z Press the n button. A confirmation message is displayed. Press the qr buttons to choose [OK], and then press the m button.
Still Images Editing Still Images • Image editing (pp. 148 – 152) is only available when the memory card has sufficient free space. Resizing Images Save a copy of images at a lower resolution. Choose [Resize]. z Press the n button, and then choose [Resize] on the 1 tab (p. 38). Choose an image. z Press the qr buttons to choose an image, and then press the m button. Y P O Choose an image size. z Press the qr buttons to choose the size, and then press the m button. X [Save new image?] is displayed.
Editing Still Images • Editing is not possible for images saved as in step 3. • Images cannot be resized to a higher resolution. Cropping You can specify a portion of an image to save as a separate image file. Choose [Trimming]. z Press the n button, and then choose [Trimming] on the 1 tab (p. 38). Choose an image. Y P O z Press the qr buttons to choose an image, and then press the m button. Cropping Area Adjust the cropping area.
Editing Still Images • Editing is not possible for images shot at a resolution of resized to (p. 148). (p. 68) or • Images supported for cropping will have the same aspect ratio after cropping. • Cropped images will have a smaller resolution than uncropped images. • If you crop still images shot using Face ID, only the names of the people left in the cropped image will remain. Changing Image Color Tones (My Colors) You can adjust image colors and then save the edited image as a separate file.
Editing Still Images Correcting Image Brightness (i-Contrast) Excessively dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast is also automatically corrected, to make subjects stand out better. Choose from four correction levels, and then save the image as a separate file. Choose [i-Contrast]. z Press the n button, and then choose [iContrast] on the 1 tab (p. 38). Choose an image.
Editing Still Images Correcting Red-Eye Automatically corrects images affected by red-eye. You can save the corrected image as a separate file. Choose [Red-Eye Correction]. z Press the n button, and then choose [Red-Eye Correction] on the 1 tab (p. 38). Choose an image. z Press the qr buttons to choose an image. Correct the image. z Press the m button. X Red-eye detected by the camera is now corrected, and frames are displayed around corrected image areas. z Enlarge or reduce images as needed.
Movies Editing Movies You can cut movies to remove unneeded portions at the beginning or end. Choose *. z Following steps 1 – 3 on pp. 122 – 123, choose * and press the m button. X The movie editing panel and editing bar are now displayed. Movie Editing Panel Specify portions to cut. z Press the op buttons to choose or . z To view the portions you can cut (identified by Movie Editing Bar on the screen), press the qr buttons to move .
Editing Movies Save the edited movie. z Press the op buttons to choose , and then press the m button. z Press the qr buttons to choose [New File], and then press the m button. X The movie is now saved as a new file. • To overwrite the original movie with the cut one, choose [Overwrite] in step 4. In this case, the original movie will be erased. • [Overwrite] is only available when memory cards lack sufficient free space. • Movies may not be saved if the battery runs out while saving is in progress.
6 Setting Menu Customize or adjust basic camera functions for greater convenience C Y P O 155
Adjusting Basic Camera Functions Functions can be configured on the 3 tab. Customize commonly used functions as desired, for greater convenience (p. 38). Silencing Camera Operations Silence camera sounds and movies as follows. z Choose [Mute], and then choose [On]. • Operation can also be silenced by holding down the p button as you turn the camera on. • Sound is not played during movies if you mute camera sounds (p. 122). To restore sound during movies, press the o button.
Adjusting Basic Camera Functions Customizing Sounds Customize camera operating sounds as follows. z Choose [Sound Options], and then press the m button. z Choose an item, and then press the qr buttons to choose an option. 1 Preset sounds (cannot be modified) 2 Preset sounds Can be changed by using the included software. • The default shutter sound is used in changes to [Shutter Sound]. mode (p.
Adjusting Basic Camera Functions Screen Brightness Adjust screen brightness as follows. z Choose [LCD Brightness], and then press the qr buttons to adjust the brightness. • For maximum brightness, press and hold the p button for at least one second when the shooting screen is displayed or when in single-image display. (This will override the [LCD Brightness] setting on the 3 tab.) To restore the original brightness, press and hold the p button again for at least one second or restart the camera.
Adjusting Basic Camera Functions Customizing the Start-up Screen Access the [Start-up Image] screen in Playback mode. z Press the 1 button. z Following the steps on p. 158, choose [2] and press the m button. Choose one of your shots. z Choose an image and press the m button. After [Register?] is displayed, press the qr buttons to choose [OK], and then press the m button. Y P O • The previous start-up setting is overwritten when you assign a new start-up image.
Adjusting Basic Camera Functions Formatting Memory Cards Before using a new memory card or a card formatted in another device, you should format the card with this camera. Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up. An Eye-Fi card (p. 190) contains software on the card itself. Before formatting an Eye-Fi card, install the software on a computer. Access the [Format] screen.
Adjusting Basic Camera Functions Low-Level Formatting Perform low-level formatting in these cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops. Low-level formatting erases all data on a memory card. Before low-level formatting, copy images on the memory card to a computer, or take other steps to back them up. Perform low-level formatting. z On the screen in step 1 on p.
Adjusting Basic Camera Functions • Regardless of the option selected in this setting, shots may be numbered consecutively after the last number of existing images on newly inserted memory cards. To start saving shots from 0001, use an empty (or formatted (p. 160)) memory card. • Refer to the ImageBrowser EX User Guide for information on the card folder structure and image formats.
Adjusting Basic Camera Functions Power-Saving Adjustment Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (p. 34). Access the [Power Saving] screen. z Choose [Power Saving], and then press the m button. Configure the settings. z After choosing an item, press the qr buttons to adjust it as needed. • To conserve battery power, you should normally choose [On] for [Auto Power Down] and [1 min.] or less for [Display Off].
Adjusting Basic Camera Functions World Clock To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/ Time setting manually. Before using the world clock, be sure to set the date and time (p. 17) and your home time zone. Specify your destination. z Choose [Time Zone], and then press the m button.
Adjusting Basic Camera Functions Date and Time Adjust the date and time as follows. Access the [Date/Time] screen. z Choose [Date/Time], and then press the m button. Configure the settings. z Press the qr buttons to choose an item, and then press the op buttons to adjust the setting. Display Language Change the display language as needed. Y P O Access the [Language] screen. z Choose [Language C ], and then press the m button. Configure the setting.
Adjusting Basic Camera Functions Restoring Defaults If you accidentally change a setting, you can restore default camera settings. Access the [Reset All] screen. z Choose [Reset All], and then press the m button. Restore default settings. z Press the qr buttons to choose [OK], and then press the m button. X Default settings are now restored. • The following functions are not restored to default settings. - 3 tab settings [Date/Time] (p. 18), [Language ] (p. 19), [Time Zone] (p. 164), [Video System] (p.
7 Accessories Use included accessories effectively and enjoy the camera in more ways with optional Canon accessories Y P O and other compatible accessories sold separately C 167
Tips on Using Included Accessories Effective Battery and Charger Use • Charge the battery on (or immediately before) the day of use Charged batteries gradually lose their charge, even when they are not used. You can easily check the charge state of the battery by attaching the cover so that S is visible on a charged battery, and attaching it so that S is not visible on an uncharged battery. • Long-term battery storage After using up all remaining battery power, remove the battery from the camera.
Optional Accessories The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available. Power Supplies Battery Pack NB-11L z Rechargeable lithium-ion battery Battery Charger CB-2LD/CB-2LDE z Charger for Battery Pack NB-11L AC Adapter Kit ACK-DC90 z For powering the camera using household power. Recommended when using the camera over extended periods, or when connecting the camera to a printer or computer.
Optional Accessories Other Accessories Waterproof Case WP-DC330L z For underwater photography at depths of up to 3 meters (9.8 ft.). Also useful for shooting in the rain, at the beach, or on ski slopes. AV Cable AVC-DC400 z Connect the camera to a TV to enjoy playback on the larger TV screen. HDMI Cable HTC-100 z For connecting the camera to an HDMI input of a high-definition TV.
Using Optional Accessories Still Images Movies Playback on a TV By connecting the camera to a TV, you can view your shots on the larger screen of the TV. For details on connection or how to switch inputs, refer to the TV manual. • Some information may not be displayed when viewing images on a TV (p. 202). Playback on a Standard-Definition TV Connecting the camera to a TV with the AV Cable AVC-DC400 (sold separately) enables you to view your shots on the larger screen of the TV as you control the camera.
Using Optional Accessories Turn the camera on. z Press the 1 button to turn the camera on. X Images from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.) z When finished, turn off the camera and TV before disconnecting the cable. • Correct display is not possible unless the camera video output format (NTSC or PAL) matches the TV format. To change the video output format, press the n button and choose [Video System] on the 3 tab.
Using Optional Accessories Display images. z Follow steps 3 – 4 on pp. 171 – 172 to display images. • It is not possible to connect the included interface cable or an optional AV cable at the same time as an HDMI Cable HTC-100. Forcing the cables into the camera at the same time may damage the camera or cables. • Camera operating sounds are not played while the camera is connected to an HDTV.
Using Optional Accessories Control the camera with the TV remote. z Press the qr buttons on the remote to browse images. z To display the camera control panel, press the OK/Select button. Select control panel items by pressing the qr buttons to choose an item, and then pressing the OK/Select button again. Camera Control Panel Options Shown on the TV . Return Closes the menu. Group Playback Displays sets of images shot in mode (p. 96). (Only displayed when a grouped image is selected.
Using Optional Accessories Powering the Camera with Household Power Powering the camera with AC Adapter Kit ACK-DC90 (sold separately) eliminates the need to monitor the remaining battery level. Make sure the camera is off. Coupler Cable Port Open the cover. z Follow step 2 on p. 15 to open the memory card/battery cover. z Open the coupler cable port as shown. Insert the coupler. z Insert the coupler as shown. C Y P O z Make sure the coupler cable passes through the port. Cable Close the cover.
Using Optional Accessories z Insert one end of the power cord into the compact power adapter, and then plug the other end into a power outlet. z Turn the camera on and use it as desired. z When finished, turn the camera off and unplug the power cord from the outlet. • Do not disconnect the adapter or unplug the power cord while the camera is still on. This may erase your shots or damage the camera. • Do not attach the adapter or adapter cord to other objects.
Still Images Movies Printing Images Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare or print images for photobooks. A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer. Also refer to the printer manual for additional information.
Printing Images Access the printing screen. z Press the m button, choose c, and press the m button again. Print the image. z Press the op buttons to choose [Print], and then press the m button. X Printing now begins. z To print other images, repeat steps 5 – 6 after printing is finished. z When you are finished printing, turn the camera and printer off and disconnect the interface cable. Y P O • For Canon PictBridge-compatible printers (sold separately), see p. 170.
Printing Images Still Images Configuring Print Settings Access the printing screen. z Follow steps 1 – 6 on pp. 177 – 178 to access the screen at left. Configure the settings. z Press the op buttons to choose an item, and then press the qr buttons to choose an option. Default Date File No. Both Off Default Off On Red-Eye 1 No. of Copies Matches current printer settings. Prints images with the date added. Prints images with the file number added.
Printing Images Cropping Images Before Printing (Trimming) By cropping images before printing, you can print a desired image area instead of the entire image. Choose [Trimming]. z After following step 1 on p. 179 to access the printing screen, choose [Trimming] and press the m button. X A cropping frame is now displayed, indicating the image area to print. Adjust the cropping frame as needed. z To resize the frame, move the zoom lever. z To move the frame, press the opqr Y P O buttons.
Printing Images Choosing Paper Size and Layout Before Printing Choose [Paper Settings]. z After following step 1 on p. 179 to access the printing screen, choose [Paper Settings] and press the m button. Choose a paper size. z Press the op buttons to choose an option, and then press the m button. Y P O Choose a type of paper. z Press the op buttons to choose an option, and then press the m button. C Choose a layout. z Press the op buttons to choose an option.
Printing Images Available Layout Options Default Matches current printer settings. Bordered Prints with blank space around the image. Borderless Borderless, edge-to-edge printing. N-up Choose how many images to print per sheet. ID Photo Prints images for identification purposes. Only available for images with a resolution of L and an aspect ratio of 4:3. Fixed Size Choose the print size. Choose from 3.5 x 5 in., postcard, or wide-format prints. Printing ID Photos Choose [ID Photo].
Printing Images Movies Printing Movie Scenes Access the printing screen. z Follow steps 1 – 6 on pp. 177 – 178 to choose a movie. The screen at left is displayed. Choose a printing method. z Press the op buttons to choose , and then press the qr buttons to choose the printing method. Print the image. Movie Printing Options Y P O Single Prints the current scene as a still image. Sequence Prints a series of scenes, a certain interval apart, on a single sheet of paper.
Printing Images Still Images Adding Images to the Print List (DPOF) Batch printing (p. 187) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform to DPOF (Digital Print Order Format) standards. Adding Images to the Print List via the FUNC.
Printing Images Standard Print Type Date File No. Clear DPOF data One image is printed per sheet. Index Smaller versions of multiple images are printed per sheet. Both Both standard and index formats are printed. On Images are printed with the shooting date. Off – On Images are printed with the file number. Off – On All image print list settings are cleared after printing.
Printing Images Setting Up Printing for Individual Images Choose [Select Images & Qty.]. z Press the n button, choose [Select Images & Qty.] on the 2 tab, and then press the m button. Choose an image. z Press the qr buttons to choose an image, and then press the m button. X You can now specify the number of copies. z If you specify index printing for the image, it is labeled with a icon. To cancel index printing for the image, press the m button again. is no longer displayed.
Printing Images Configure the print settings. z Press the op buttons to choose [Order], and then press the m button. Setting Up Printing for All Images Choose [Select All Images]. z Following step 1 on p. 186, choose [Select All Images] and press the m button. Configure the print settings. z Press the qr buttons to choose [OK], and then press the m button. Clearing All Images from the Print List Choose [Clear All Selections]. Y P O z Following step 1 on p.
Printing Images Still Images Adding Images to a Photobook Photobooks can be set up on the camera by choosing up to 998 images on a memory card and importing them into the included software on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with your own printer. Choosing a Selection Method z Press the n button, choose [Photobook Set-up] on the 1 tab, and then choose how you will select images.
Printing Images Choose an image. z Press the qr buttons to choose an image, and then press the m button. is displayed. z To remove the image from the photobook, press the m button again. is no longer displayed. z Repeat this process to specify other images. z When finished, press the n button to return to the menu screen. X Adding All Images to a Photobook Choose [Select All Images]. z Following the procedure on p. 188, choose [Select All Images] and press the m button.
Still Images Movies Using an Eye-Fi Card Before using an Eye-Fi card, always confirm that local use is permitted (p. 3). Inserting a prepared Eye-Fi card enables automatic wireless transfer of images to a computer or uploading to a photo-sharing website. Images are transferred by the Eye-Fi card. Refer to the card’s user manual or contact the manufacturer for instructions on preparing and using cards or resolving transfer problems. • When using an Eye-Fi card, keep the following points in mind.
Using an Eye-Fi Card • Power saving (p. 34) on the camera is temporarily disabled during image transfer. • Choosing mode will interrupt the Eye-Fi connection. Although the Eye-Fi connection will be restored after you choose another shooting mode or enter Playback mode, the camera may transfer any movies made in mode again. Checking Connection Information Check the access point SSID used by the Eye-Fi card or the connection status, as needed.
C 192 Y P O
8 Appendix Helpful information when using the camera C Y P O 193
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Power Nothing happens when the power button is pressed. • Confirm that you are using the correct type of battery, and that there is sufficient charge (p. 201). • Confirm that the battery is inserted facing the correct way (p. 15). • Confirm that the memory card/battery cover is fully closed (p. 16).
Troubleshooting is displayed when the shutter button is pressed halfway (p. 54). • • • • Set [IS mode] to [Continuous] (p. 119). Set the flash mode to h (p. 117). Increase the ISO speed (p. 104). Mount the camera on a tripod or take other measures to keep it still. In this case, set [IS Mode] to [Off] (p. 119). Shots are out of focus. • Press the shutter button halfway to focus on subjects before pressing it all the way down to shoot (p. 35).
Troubleshooting Subjects are affected by red-eye (p. 69). • Set [Red-Eye Lamp] to [On] (p. 75) to activate the red-eye reduction lamp (p. 4) in flash shots. Note that while the red-eye reduction lamp is on (for about one second), it is not possible to shoot, because the lamp is counteracting red-eye. For best results, have subjects look at the red-eye reduction lamp. Also try increasing the lighting in indoor scenes and shooting at closer range. • Edit images using red-eye correction (p. 152).
Handling Precautions • There may be brief interruptions when playing movies copied to memory cards that have slow read speeds. • When movies are played on a computer, frames may be dropped and audio may skip if computer performance is inadequate. Computer Cannot transfer images to a computer. When attempting to transfer images to the computer via a cable, try reducing the transfer speed as follows. • Press the 1 button to enter Playback mode.
On-Screen Messages If an error message is displayed, respond as follows. No memory card • The memory card may be inserted facing the wrong way. Reinsert the memory card facing the correct way (p. 16). Memory card locked • The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the locked position. Switch the write-protect tab to the unlocked position (p. 15). Cannot record! • Shooting was attempted without a memory card in the camera.
On-Screen Messages Exceeded selection limit • More than 998 images were selected for Print List (p. 184) or Photobook Set-up (p. 188). Choose 998 images or less. • Print List (p. 184) or Photobook Set-up (p. 188) settings could not be saved correctly. Reduce the number of selected images and try again. • You attempted to choose more than 500 images in Protect (p. 135), Erase (p. 139), Favorites (p. 144), My Category (p. 145), Print List (p. 184), or Photobook Set-up (p. 188).
On-Screen Information Shooting (Information Display) Battery level (p. 201) Camera orientation* White balance (p. 106) My Colors (p. 108) Drive mode (pp. 48, 109) Grid lines (p. 72) Camera shake warning (p. 45) Metering method (p. 104) Compression (image quality) (p. 119) / Resolution (p. 68) Recordable shots Self-timer (p. 52) Movie quality (p. 71) Remaining time 200 Y P O Digital zoom magnification (p. 51), Digital tele-converter (p. 111) Shooting mode (p. 204), Scene icon (p. 47) Focusing range (pp.
On-Screen Information * : Regular orientation, : Held vertically The camera detects the shooting orientation and adjusts settings for optimal shots. Orientation is also detected during playback, and in either orientation, the camera automatically rotates images as needed. However, the orientation may not be detected correctly when the camera is pointed straight up or down. Battery Level An on-screen icon or message indicates the battery charge level.
On-Screen Information Playback (Detailed Information Display) Movies (pp. 42, 122), High-speed burst (p. 96), Print list (p. 184) My Category (p. 145) Shooting mode (p. 204) ISO speed (p. 104), Playback speed (pp. 85, 99) Exposure compensation level (p. 103) White balance (p. 106) Histogram (p. 124) Group playback (p. 128), Image editing (pp. 148 – 152) Compression ratio (image quality) (p. 119) Y P O Resolution (pp. 68, 71), MOV (movies) Transferred via Eye-Fi (p. 190) Battery level (p.
On-Screen Information Summary of Movie Control Panel in “Viewing” (p. 122) Exit Play Slow Motion (Press the qr buttons to adjust the playback speed. No sound is played.) Skip Backward* (To continue skipping backward, keep holding down the m button.) Previous Frame (For fast-rewind, keep holding down the m button.) Next Frame (For fast-forward, keep holding down the m button.) Skip Forward* (To continue skipping forward, keep holding down the m button.) * Edit (p.
Functions and Menu Tables Functions Available in Each Shooting Mode 4 Shooting Mode A Function G I Exposure Compensation (p. 103) – { { { { { { { AE Lock/FE Lock*1 (pp. 103, 118) – { { { { { – { – { – { – { – { Focusing Range (pp. 110, 111) e u – { { { { – – – { { { { – { { { – { – { – { – { h – { { { { { { { Z *2 { { { { { – { – { – { – { – { – { { – – – – – { { { { – – – – { { { { { Tracking AF (p. 56) Flash (pp.
Functions and Menu Tables 4 TY S P N xv { { { { { { { { { – – { { – { – – – – – – – – – – – – – – – – – – – { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { – { – – – – { { { { { { { – – – – – – – { – { { { { { { { { { { { { { { { { { { { { – { – { – – – – – – – – – – – – – – – – – *3 { – – { – { – { – { – { – { – { – { – { – { – { – { – { – { { { – { – { – { {
Functions and Menu Tables FUNC. Menu 4 Shooting Mode A Function Metering Method (p. 104) My Colors (p. 108) *2 *3 Underwater White Balance Compensation (p. 80) ISO Speed (p. 104) Self-Timer Settings (p. 53) ] [ $ Delay*4 Shots*5 Drive Mode (p. 109) W Still Image Aspect Ratio (p. 67) Resolution (p. 68) Compression (p. 119) Movie Quality (p.
Functions and Menu Tables 4 TY S P N xv { – { – { – { – { – { – { – { – { – { – { – { – { – { – { – { – { – { { { { { { { { { { { { { { { { { – – – – – – – – – – – – – { { { – { { { – { { { – { – { – { – { – { – { – { – { – { – { { { { { { { – { – { – – – – – – – – { – { { { – – { – { – { – { – { – { – { – { – { – { – { { { – { – { – { – { – { – – – – – – – – { – { { { { { { { { { { { {
Functions and Menu Tables 4 Shooting Menu 4 Shooting Mode A Function AF Frame (p. 112) AF Frame Size*3 (p. 114) Digital Zoom (p. 51) AF-Point Zoom (p. 73) Servo AF (p. 115) AF-assist Beam (p. 75) Flash Settings (pp. 69, 75) i-Contrast (p. 105) Hg Lamp Corr. (p. 70) Review (p. 76) Review Info (p. 76) Blink Detection (p. 74) Grid Lines (p. 72) IS Settings (p. 119) Date Stamp (p. 55) Face ID Settings (p. 57) Face AiAF*1 Tracking AF Center Normal Small Standard Off Digital Tele-converter (1.6x/2.
Functions and Menu Tables 4 { { { { { – { { – – – – – { { { { { { – { – – { { – – { – – – – – – { { – { { { – { { – { { { – { { { { { { – { { { { { { – { { { { { { – { TY S P N xv { { { { { – { – { { { { { { { { { { { { { { { { { { { { – – { { – – { { – { { { { { { – { { { – { – – – – – – – – – – – – – – – – – { { – { { { – – – { – { { { – – { { { { { { { { – { – { { { – { – { – { { { – { – { – { { { – { – { – { { { – { { { { { { { – { { { { { { { – { { { {
Functions and Menu Tables 3 Set up Menu Item Ref. Page Item Ref. Page Mute p. 156 Lens Retract p. 162 Volume p. 156 Power Saving pp. 34, 163 Sound Options p. 157 Time Zone Hints & Tips p. 157 Date/Time p. 18 LCD Brightness p. 158 Video System p. 172 Ctrl via HDMI p. 173 Eye-Fi Settings p. 190 Start-up Image Format p. 158 pp. 160, 161 p. 164 File Numbering p. 161 Language p. 19 Create Folder p. 162 Reset All p. 166 1 Playback Menu Item Ref. Page C Slideshow p.
Functions and Menu Tables 2 Print Menu Item Print Ref. Page – Item Ref. Page Select All Images p. 187 Select Images & Qty. p. 186 Clear All Selections p. 187 Select Range p. 186 Print Settings p. 184 Playback Mode FUNC. Menu Item Ref. Page Item Ref. Page Rotate p. 142 Play Movie p. 122 Print List p. 184 Movie Digest Playback p. 128 Protect p. 135 Favorites p. 144 Erase p. 139 Group Playback p. 128 C Smart Shuffle p. 133 Image Search p. 126 Y P O Slideshow p.
Index A AC adapter kit.................................. 169, 175 Accessories ............................................. 169 AE lock .................................................... 103 AF frames.................................... 21, 43, 112 AF J Focusing AF lock .................................................... 116 Aspect ratio ............................................... 67 AUTO mode (shooting mode) ............. 20, 42 AV cable ..................................................
Index G P Grid lines ................................................... 72 P (shooting mode) ................................... 102 Package contents ........................................ 2 Photobook set-up .................................... 188 PictBridge ........................................170, 177 Playback J Viewing Portrait (shooting mode) ............................78 Poster effect (shooting mode) ...................82 Powered IS ..............................................
Index Soft focus (shooting mode) ....................... 86 Software DIGITAL CAMERA Solution Disk ......... 2 Installation .......................................... 27 Sounds .................................................... 156 Stitch Assist (shooting mode).................... 98 Strap............................................................ 2 Super slow motion movie (movie mode) ... 99 Super vivid (shooting mode)...................... 82 T Terminal ..........................
MEMO C Y P O 215
USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA, USA only Included lithium battery contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
FCC Notice (Digital Camera, Model PC1733 systems) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Battery Charger CB-2LD IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger CB-2LDE The adapter can be used with a power supply between 100 and 240 V AC. Contact your Canon dealer for information about plug adapter for overseas use. For U.S.A.
