PowerShot A75 Camera User Guide

120
List of Messages
The following table explains each of the messages that may appear on the LCD monitor.
z For messages which may appear when a printer is connected, refer to the Direct Print User
Guide.
Busy...
The camera is recording image data to the CF card.
The playback mode is running.
No memory card You attempted to shoot or play back with no CF card installed.
Cannot record You attempted to shoot with no CF card installed.
Memory card error There is something wrong with the CF card.
Memory card full CF card is too full to accommodate more images or print settings.
Naming error
The camera cannot generate a file name for the image you have shot
because the card already contains a folder having the same name as the file
to be created, or the file number has already reached the maximum possible
value.
Display the Play menu and set [File Number Reset] to [On]. Save all images
you wish to keep into your computer, and reformat the CF card. Please note
that formatting will erase all data in the card.
Change the batteries
Battery charge is insufficient to operate the camera. Replace all batteries at
the same time with new AA-size alkaline batteries (p. 17) or fully recharged
Canon NiMH batteries.
No image No images recorded on CF card.
Image too large
You attempted to play back an image whose resolution exceeded 4064 x
3048 pixels or whose file size was too large.
Incompatible JPEG
format
You attempted to play back an incompatible JPEG file.