Operation Manual

42
You can manually set the shutter speed and aperture to shoot images.
z When you press the shutter button halfway, the difference
between the standard exposure* and the selected exposure
appears on the LCD monitor. If the difference is more than ±2
stops, “–2” or “+2” appears in red.
* Standard exposure levels are calculated by measuring light according to
the currently selected metering mode.
Manually Setting the Shutter
Speed and Aperture
Shooting Mode
z If you wish to change the exposure, select shutter speed or
aperture using the button, then adjust the value using
the or button.
z If the zoom is adjusted after these values are set, the
aperture value may change in accordance with the zoom
position (p. 40).
z The LCD monitor’s brightness matches the selected shutter
speed and aperture value.
When you select a fast shutter speed or shoot a subject in a
dark place, the image will always be bright if the flash is set
to (Flash on).