User Guide

88
Viewing Images on a TV set
You can use a video-compatible television as a monitor to shoot or play back
images when it is connected to the camera with the supplied AV Cable
.
1
Turn off the Camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
! Open the terminal cover by slipping a
fingernail under the lower end and
plug the AV cable in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to Video mode.
5
Turn on the camera.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 27). The default
setting varies between regions.
If the video system is set incorrectly, the camera output may
not display properly.
VIDEO
AUDIO
Yellow
Black
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL:
Europe, Asia (excluding Taiwan), Oceania and others