User Guide

Select a movie mode using

the or button.

! In , or mode, you can

change the recording pixels and

frame rate (p. 41).

! For and mode procedures,

see "Changing the Color" (p. 60).

Shoot.

! Pressing the shutter button halfway automatically sets the

exposure, focus and white balance settings.

! Pressing the shutter button fully starts recording video and

sound simultaneously.

! During shooting, the recording time and [

Rec] appear on

the LCD monitor.

! Pressing the shutter button fully again stops recording.

Recording will stop automatically under the following

circumstances.

- When the maximum recording time elapses

- When the built-in memory or memory card becomes full

! You are recommended to use a memory card that has

been formatted in your camera to shoot movies (p. 30).

The memory card supplied with the camera may be used

without further formatting.

! Be careful of the following while recording.

- Do not touch the microphone.

- Do not press any buttons other than the shutter button.

The sound that buttons make will be recorded in the

movie.

- The camera will automatically adjust the exposure and

white balance to suit the shooting conditions during

recording. Please note, however, that the sounds made

by the camera automatically adjusting the exposure may

also be recorded.

The focus and optical zoom settings remain fixed for

subsequent frames at the values selected for the first frame.